- RS Stock No.:
- 163-2653
- Mfr. Part No.:
- NCS5651MNTXG
- Brand:
- onsemi
Available to back order for despatch 07.03.2025
Added
Price Each (On a Reel of 2500)
Kr. 13,22
(exc. VAT)
Kr. 16,52
(inc. VAT)
Units | Per unit | Per Reel* |
2500 + | Kr. 13,22 | Kr. 33 050,00 |
*price indicative |
- RS Stock No.:
- 163-2653
- Mfr. Part No.:
- NCS5651MNTXG
- Brand:
- onsemi
Technical Reference
Legislation and Compliance
- COO (Country of Origin):
- CN
Product Details
NCS5651MNTXG Dual Operational Amplifier, ON Semiconductor
The NCS5651 is a high efficiency, class A/B, low distortion power line driver. It is optimised to accept a signal from a Power Line Carrier modem. It incorporates two Operational Amplifiers (op-amps). The output op-amp is designed to drive up to 2 A peak. At the output current of 1.5 A, the output voltage is guaranteed to swing within 1 V or less of either rail, giving the user improved SNR. In addition to the output amplifier, the small-signal provided op-amp can be configured as a unity gain follower buffer or it can provide a stage of a 4-pole low pass filter.
The NCS5651 offers a current limit programmable with a single resistor. The device provides also two independent thermal flags with hysteresis. The thermal warning flag shows when the internal junction temperature has reached a user programmable thermal warning threshold. The thermal error flag indicates that the internal junction temperature has exceeded 150°C.
Typical applications are Power Line Communication (PLC) applications, actuators and motors drivers and any applications where a robust power amplifier is required
The NCS5651 offers a current limit programmable with a single resistor. The device provides also two independent thermal flags with hysteresis. The thermal warning flag shows when the internal junction temperature has reached a user programmable thermal warning threshold. The thermal error flag indicates that the internal junction temperature has exceeded 150°C.
Typical applications are Power Line Communication (PLC) applications, actuators and motors drivers and any applications where a robust power amplifier is required
Features
Rail-to-Rail: drop of only +/-1 V with Lout = 1.5A
Flexible 4th-Order Filtering
Current-Limit Set with One Resistor
Diagnostic Flags Level Shifted to VCC to Simplify Interface with External MCU
Thermal Warning Flag with Flexible Threshold Setting
Thermal Error flag and Shutdown - Overcurrent Flag
Enable/Shutdown Control
Exposed Thermal Pad
Flexible 4th-Order Filtering
Current-Limit Set with One Resistor
Diagnostic Flags Level Shifted to VCC to Simplify Interface with External MCU
Thermal Warning Flag with Flexible Threshold Setting
Thermal Error flag and Shutdown - Overcurrent Flag
Enable/Shutdown Control
Exposed Thermal Pad
Operational Amplifiers, ON Semiconductor
Specifications
Attribute | Value |
---|---|
Mounting Type | Surface Mount |
Package Type | QFN |
Power Supply Type | Single |
Number of Channels per Chip | 2 |
Pin Count | 20 |
Typical Single Supply Voltage | 6 → 12 V |
Typical Gain Bandwidth Product | 80MHz |
Minimum Operating Temperature | -40 °C |
Maximum Operating Temperature | +125 °C |
Rail to Rail | No |
Width | 4mm |
Length | 4mm |
Dimensions | 4 x 4 x 0.95mm |
Height | 0.95mm |