Tektronix P6243 Oscilloscope Probe, Probe Type: Active 1GHz

  • RS Stock No. 209-7860
  • Mfr. Part No. P6243
  • Brand Tektronix
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): US
Product Details

P6243 Active Probe for SMDs

The P6243 active FET probe is the high performance probing solution for 500 MHz oscilloscopes. Complete with a probe-only bandwidth of 1 GHz, it will provide a 500 MHz system bandwidth when used with the Tektronix full line of 500 MHz oscilloscopes. The probe is powered by the TekProbe BNC interface, eliminating the need for additional power supplies and cables when used with TekProbe BNC oscilloscopes. It offers superior signal acquisition on surface mount devices compared to the much higher capacitive loading of passive probes. The included accessories and adapters allow for easy attachment to SMDs.

1 GHz Bandwidth (probe only)
≤pf Input Capacitance
1MΩ Input Resistance
Direct access to SMDs as small as 0.5mm pitch
Measures CMOS, BiCMOS, ECL, GaAs and TTL Logic
Low mass probe head/cable
Small compact probe head and versatile attachment accessories allow direct connection to the device under test
Provides scope bandwidth at the probe tip for the TDS3000 series scope up to 1 GHz bandwidth

Cable Length 1.3 m
Attenuation 10X
Bandwidth(Probe Only) 1 GHz
Rise-time <350 ps
Input C in pF =1 pF
Input R in Ohms 1 MΩ
Linear Dynamic Range ±8 V
DC Offset Range N/A
Max Voltage (Non destruct) (DC+PkAC) ±15 V
Propagation Delay 5.3 ns ±200 ps
Compatible Oscilloscopes Tektronix TDS3000/3000B, TDS500/600/700
Kit Contents
2 off 50 mil SureFoot adapter 1 off 3 in. Ground Lead 10 off Solderable Probe Tips Right Angle Square Pin Adaptor
2 off 25 mil SureFoot adapter 1 off Y Lead Adapters 2 off 1 in. Ground Lead 100 Mil Square Pin Adaptor
2 off 0.5 mm SureFoot adapter 2 off SMT KlipChip™ adapter 1 off 6 in. Ground Lead Colour Coding Clips, 2 each 5 colours

Supplied with

Solderable probe tips (10), 1 inch ground lead (2), 3 inch ground lead (1), 6 inch ground lead (1), Y lead adapter (1), SMT KlipChip adapter (2), colour-coding clips, 2 each, 5 colours (1 set), right angle square pin adapter (1), 100 Mil square pin adapter (1)

Specifications
Attribute Value
Probe Type Active
Attenuation 1:10
Bandwidth 1GHz
Connector Type BNC
Model Number p P6243
Rise Time 350ps
3 In stock for delivery within 1 working days
Price Each
kr 22 799,40
(exc. VAT)
kr 28 499,25
(inc. VAT)
Units
Per unit
1 +
kr 22 799,40
Related Products
Bandwidth 500 MHz. Probe Ratio 10:1Cable Length 1.2 ...
Description:
Bandwidth 500 MHz. Probe Ratio 10:1Cable Length 1.2 meters. Input Impedance 10 MOhm. Capacitance 12 pFApprox. Rise Time 3 ns. Max. Voltage 1000 V CAT III / 600 V CAT IVCompensation Range 10 to 22 pFSafety Rating 1000 V CAT ...
Passive probes are standard accessories for Rohde & ...
Description:
Passive probes are standard accessories for Rohde & Schwarz oscilloscopes. They automatically detect the attenuation factor, and their springloaded tips make them precise to use. Passive probe 1:1 (10MHz) 10:1 (300MHz) - RT-ZP03 RS 144-8208Passive probe 10:1 (500MHz) double pack ...
High quality passive voltage probes suitable for use ...
Description:
High quality passive voltage probes suitable for use with Tektronix oscilloscopes or as general purpose replacements. Each probe features compensation trimmers to allow matching to instruments. Supplied complete with accessories. Rated voltage CAT II 300V rms, CAT I 400V rms. ...
Compact design with a 2.5mm probe tip diameter ...
Description:
Compact design with a 2.5mm probe tip diameter provides better visibility to the circuit under test than conventional 5mm or 3.5mm probe tips. This makes it easier to probe today’s fine pitched space ICs and components. The replaceable probe tip ...