- RS Stock No.:
- 808-084
- Mfr. Part No.:
- HPS200
- Brand:
- Hi-Force
2 In stock for same day dispatch
Added
Price Each
Kr. 4 586,23
(exc. VAT)
Kr. 5 732,79
(inc. VAT)
Units | Per unit |
1 + | Kr. 4 586,23 |
- RS Stock No.:
- 808-084
- Mfr. Part No.:
- HPS200
- Brand:
- Hi-Force
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
- COO (Country of Origin):
- GB
Product Details
Low Height Pad Cylinders-High Pressure
Combine minimum collapsed height with optimum stroke
They provide a short adjusting and lifting force in confined work areas
Steel stop rings further increase the cylinders capacity to withstand side loads and restrain the piston at full extension
They provide a short adjusting and lifting force in confined work areas
Steel stop rings further increase the cylinders capacity to withstand side loads and restrain the piston at full extension
Warning
Safety Note - High pressure hydraulic equipment can work at extremely high pressures and careful attention should be paid to working pressures when choosing accessories.
Low Height Cylinders
High quality single acting, spring return cylinders, manufactured from high strength alloy steels, and providing a minimum safety factor of 3:1
Piston rods are chrome plated to prevent corrosion and the use of pressure activated anti-extrusion seals, enhance performance and reliability
Heavy duty return springs, assist single acting pistons to retract fully. Steel stop rings further increase a cylinders capacity to withstand side loads and restrain the piston at full extension
All port connections are 3/8 in. NPT and each cylinder is fitted with a high flow, quick release, female half coupler as standard
All cylinders are individually tested to 125% of their working pressures and are issued with a manufacturers test certificate, and instruction leaflet
The capacities of all our range of high pressure cylinders are specified at a working pressure of 700 bar
For suitable oil see technical specification of Hydraulic Hand Pumps
Maintenance seal kits are available separately
Piston rods are chrome plated to prevent corrosion and the use of pressure activated anti-extrusion seals, enhance performance and reliability
Heavy duty return springs, assist single acting pistons to retract fully. Steel stop rings further increase a cylinders capacity to withstand side loads and restrain the piston at full extension
All port connections are 3/8 in. NPT and each cylinder is fitted with a high flow, quick release, female half coupler as standard
All cylinders are individually tested to 125% of their working pressures and are issued with a manufacturers test certificate, and instruction leaflet
The capacities of all our range of high pressure cylinders are specified at a working pressure of 700 bar
For suitable oil see technical specification of Hydraulic Hand Pumps
Maintenance seal kits are available separately
Specifications
Attribute | Value |
---|---|
Stroke | 11mm |
Capacity | 20t |
Closed Height | 52mm |
Single/Double Acting | Single |
Manufacturer Series | HPS |
Extended Height | 63mm |
Cylinder Effective Area | 28.6cm² |
Oil Capacity | 31cm³ |
Outside Diameter | 100mm |
Maximum Operating Pressure | 700bar |
Weight | 2.6kg |
- RS Stock No.:
- 808-084
- Mfr. Part No.:
- HPS200
- Brand:
- Hi-Force