Development Kit H-Bridge 2 Click for use with Direction Control, Mechanized Toys, Motor Speed, Movement Actuators,

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

H-Bridge 2 click can be used to drive a motor by utilizing a specific configuration of the output stage MOSFETs, known as the H-bridge. This configuration enables H-Bridge 2 click to drive a motor with up to 1.2A and 15V, providing control of the speed and direction, as well as the dynamic (rheostatic) braking capability. The Click board™ uses a monolithic H-bridge IC, which implements a set of features that provide trouble-free operation of the connected motor, such as the undervoltage detection, shoot-through current protection, efficient output stage MOSFETs with low RDSON, level shifted output for an external MOSFET control and more.

2.0 V to 15 V continuous operation
Output current 1.2 A (DC), 3.8 A (peak)
450 mΩ RDS(on) H-Bridge MOSFETs
5.0 V TTL- / CMOS-compatible inputs
PWM frequencies up to 200 kHz
Undervoltage shutdown
Cross-conduction suppression

Specifications
Attribute Value
Power Management Function Half-Bridge Driver
Kit Name H-Bridge 2 Click Board
2 In stock for delivery within 1 working days
Price Each
kr 176,47
(exc. VAT)
kr 220,59
(inc. VAT)
Units
Per unit
1 +
kr 176,47
Related Products
Compact 6-channel spectrometry solution. Simple text-based command interface ...
Description:
Compact 6-channel spectrometry solution. Simple text-based command interface via UART,or direct register read and write with interrupt on sensor ready option on I²CLifetime-calibrated sensing with no drift over time or temperature. No additional signal conditioning required. Electronic shutter ...
Super thin ChipLED with exceptional brightness 1.6 mm ...
Description:
Super thin ChipLED with exceptional brightness 1.6 mm x 0.8 mm x 0.55 mm (L x W x H)High reliability PCB based. Wavelength typ. 525 nm (true green)In. GaN technology. Viewing angle: extremely wide 146°Grouping parameter: luminous intensity dominant wavelength, ...
Position Sensorless BLDC Drivers (no Hall Sensor required)180° ...
Description:
Position Sensorless BLDC Drivers (no Hall Sensor required)180° Sinusoidal Drive for High Efficiency and Low Acoustic Noise. Supports 2V to 14V Power Supplies. Speed Control through Power Supply Modulation (PSM) and/or Pulse-Width Modulation (PWM)Built-In Frequency Generator (FG output signal)Built-In Lock-Up ...
300nA Quiescent Supply Current Into OUTTrue Shutdown Mode0.5nA ...
Description:
300nA Quiescent Supply Current Into OUTTrue Shutdown Mode0.5nA Shutdown Current. Output Disconnects from Input. No Reverse Current with VOUT 0V to 5V95% Peak Efficiency400mV to 5.5V Input Range0.88V Minimum Startup Voltage1.8V to 5V Output Voltage Range100mV/Step. Single 1% Resistor Selectable ...