Pressmaster KCC 2511 Ratchet Crimping Tool for Coaxial

  • RS-lagernummer 241-8380
  • Producentens varenummer 4300-2204
  • Produsent Pressmaster
Tekniske datablader
Regulativer og opprinnelsesland
RoHS Status: ikke relevant
COO (Country of Origin): SE
Produktdetaljer

Pressmaster KCC 1113S Coaxial Hand Crimp Tool

The KCC 2511 is an ergonomic hand crimp tool for BNC, TNC and N coaxial cable connectors. Producing 5.41 mm, 10.90 mm, 2,54 mm, 1.69 mm/.213'',429", 0.100", 0.067'' hexagon shaped crimps, with the minimum of effort, either right or left handed. Suitable for a wide range of coaxial cables see manufacturers product data sheet for a full list.

Features and Benefits
• Non-slip main handle and low friction moving handle ensure a comfortable hand grip
• Provides two-hand grip in the final phase of crimping, increasing comfort and productivity
• Unique mechanism significantly reduces hand force requirement over competing for crimping tools
• The non-slip pad holds the tool in place when used on a work surface
• Full cycle crimp mechanism to ensure consistent, reliable crimp
• Ratchet release mechanism to clear miscrimps and obstructions
• Precision eccentric adjustment for consistent performance and ability to calibrate
• Hole in handle allows attachment of safety strap for working overhead
• Each tool has a unique serial number for traceability
• Durable: lifespan exceeds 50000 cycles
• High strength, through hardened alloy Swedish steel construction

Typical Applications:
• Maintenance & repair
• Electrical Installations
• Cable assemblies

FAQ’s:
What is the difference between un-insulated and insulated crimp tools?
Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.

How do you maintain the product?
• Axles and other movable parts should be regularly lubricated.
• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants.
• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly.

The Importance of a High-Quality Crimp
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

General Support Tooling

The crimp tooling detailed on this and subsequent pages are recommended, in most cases, for a wide range of connectors and associated cable types. The 'Crimp Tool Selection Guide' table indicates the cable type(s) and/or specific type(s) of connector for which each tool is recommended. The 'Die Set Selection Guide' table indicates compatible cable types and their 'Group number' and details of frame tool required. A small number of crimp tools have been considered to be 'dedicated' to a connector type. These tools have been incorporated with those connector ranges on respective pages, and are not included within this General Tooling Range.

Die Set Selection Guide
Die Set Stock no Die Set Typical Cables (Cable Groups) Use Frame Tool Die Set Apertures
431-4432 Y1508 BT2002VQ 425-6156 0.057, 0.204 ( in )
431-4448 Y1503 BT3002VC 425-6156 0.057, 0.178 ( in )
431-4505 Y1509 BT2003VR 425-6156 0.057, 0.268 ( in )
425-6162 Y1829 BT2003 (H) 425-6156 0.068, 0.296 ( in )
431-4454 Y1514 RG58 (A) 425-6156 0.067, 0.213 ( in )
431-4460 Y1505 RG59 (F) 425-6156 0.057, 0.255 ( in )
431-4498 Y110 RG213 (T) 425-6156 0.10, 0.429 ( in )
848-436 - RG58, 59 (A, F, K) 848-391 6.48, 5.41, 1.72 ( mm )
282-3502 - RG174, 178, 179 (B, E, N) 848-391 3.25, 2.68, 1.71 ( mm )
158-8961 - BT2002, 2003 (H, J) 848-391 6.81, 5.18, 1.46 ( mm )
241-8396 - RG213, 214 (T, W) 848-391 10.89, 2.54, 2.03, 1.72 ( mm )
Crimp Tool Selection Guide
Tool Stock no BNC TNC N 1.6 / 5.6 SMA SMB UHF Mini UHF Die Set Apertures (mm) Typical Cable Types
298-1046   !         6.48, 5.41, 1.69 RG58, 59, 62, 71
298-1080           4.52, 3.25, 1.69 RG174, RG179
447-459               4.52, 1.69 MIN RG59, 179
456-431             5.38 to 5.43, RG58, URM43, URM76
456-447             6.45 to 6.50, RG59, RG62
473-0648       6.45 to 6.50, 1.68 to 1.71 RG59, URM70
456-778         6.48, 5.40, 1.70 n/a
241-8380             10.9, 5.41, 2.54, 1.69 RG58, 213, 214
Note: Where a ’! ’ is shown in this first table with respect to the 1.6 / 5.6 series of connectors, users should be aware that the two tools identified will crimp the outer ferrule of the connector only.
Spesifikasjoner
Attribute Value
Series KCC 2511
Crimp Connector Type Coaxial
Crimp Tool Type Ratchet
60 Innen 1 virkedag(er) (UK-lager)
Pris ekskl. MVA Each
kr 1 311,55
(ekskl. MVA)
kr 1 639,44
(inkl. MVA)
enheter
Per unit
1 +
kr 1 311,55
Relaterte Produkter
C Frame hand operated crimp tools with a ...
Description:
C Frame hand operated crimp tools with a double action jaw closure designed for service and repair. These C Frame hand crimp tools feature a ratchet mechanism which stays locked until the handles of the tool are fully closed and ...
The CT2-AS assembles 59,6,7 and 11 “F” compression ...
Description:
The CT2-AS assembles 59,6,7 and 11 “F” compression type connectorsAlso for use with PPC-EX and PCT-TRS compression connectorsAssembles most RCA and IEC connectorsSpring loaded handle with push button lockNew ergonomic designEasy to use around and in wall boxes where space ...
Connectors used to supply storage units for micro ...
Description:
Connectors used to supply storage units for micro and mini-computers (floppy and hard disk).4-way free-mounted enclosures (wire to wire).Receive crimp contacts, which are to be ordered separately (in bulk by the 100).Note:Male units receive female contacts and vice versa.
Multi-function ratchet action tool that cuts, strips and ...
Description:
Multi-function ratchet action tool that cuts, strips and crimpsRobust construction offering long-term durabilityCrimps 6-position RJ-12 and RJ-11 modular plugsCrimps 6-position BT plugsCuts and strips flat cable.