STMicroelectronics STM32 Nucleo 13.56MHz Near Field Communication (NFC), RFID Expansion Board

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

X-NUCLEO-NFC02A1 Dynamic NFC Tag Expansion Board

The X-NUCLEO-NFC02A1 board contains the M24LR04E-R, a dynamic NFC/RFID Tag IC with a dual-interface EEPROM. It features an I²C interface.

Operated either from an external power supply or directly powered by the received carrier electromagnetic field
M24LR04E-R is 4KB EEPROM organized as 512 x 8 bits in the I²C mode and as 128 x 32 bits in RF mode
Up to 4kbit memory with NDEF support
13.56MHz double layer inductive antenna etched on the PCB, 31 x 30 mm
Compatible with STM32 Nucleo boards
Equipped with Arduino UNO R3 connector
Self powered or powered through the Arduino UNO R3 connectors
Energy Harvesting mode
3 x User LEDs

Near field communication (NFC) - STMicroelectronics

Specifications
Attribute Value
RF Technology Near Field Communication (NFC), RFID
Kit Classification Expansion Board
For Use With Arduino, STM32 Nucleo Board
Kit Name STM32 Nucleo
Frequency 13.56MHz
16 In stock for delivery within 1 working days
Price Each
kr 85,84
(exc. VAT)
kr 107,30
(inc. VAT)
Units
Per unit
1 +
kr 85,84
Related Products
Two eRIC Arduino Shields which allow wireless communication ...
Description:
Two eRIC Arduino Shields which allow wireless communication between Arduino™ boards using proprietary LPRS easy. Radio technology. This technology provides considerably greater range and lower power consumption than similar Wi-Fi or Bluetooth devices operating in the overcrowded 2.4GHz bands. An ...
x. Chips are a rapid electronics development ecosystem ...
Description:
x. Chips are a rapid electronics development ecosystem to help reduce development time and simplify making custom products as well as aiding learning. Without soldering, wiring, breadboarding, or hardware knowledge you can assemble a circuit in minutes, and concentrate on ...
Seeed’s LTE CAT.1 Pi HAT is an open ...
Description:
Seeed’s LTE CAT.1 Pi HAT is an open source cellular extension modem for Raspberry Pi, based on u-blox LARA-R2xx series. It compatible with Raspberry Pi 1 Model B+ and later versions.LTE CAT.1 Pi HAT is designed for LTE Category 1 ...
The Grove-125KHz RFID Reader is a module used ...
Description:
The Grove-125KHz RFID Reader is a module used to read EM4100 RFID card information with two output formats: Uart and Wiegand. It has a sensitivity with maximum 7cm sensing distance. Selectable output format: Uart or Wiegand.4Pins Electronic Brick Interface. High ...