Thrust Roller Bearing NTB1024AS, 10mm I.D, 24mm O.D

Tekniske datablader
Regulativer og opprinnelsesland
RoHS Status: ikke relevant
COO (Country of Origin): JP
Produktdetaljer

Axial Needle Roller Bearings with Washers

Axial needle roller bearings should preferably be guarded on to the shaft
Space saving can be achieved if the faces of the adjacent parts are designed as raceways, so that washers can be dispensed with
Hardened steel cages
High load carrying capacity
High rigidity/space ratio

Supplied with

two axial washers.

//media.rs-online.com/t_line/L198885-01.gif
//media.rs-online.com/t_line/LD198885-01.gif
//media.rs-online.com/t_line/LF198885-99.gif
//media.rs-online.com/t_line/LI198885-02.gif
Spesifikasjoner
Attribute Value
Inside Diameter 10mm
Outside Diameter 24mm
Roller Bearing Type Thrust
Race Width 2mm
Bore Type Parallel
Material Metal
Static Load Rating 23.9kN
Cage Material Steel
Number of Rows 1
Dynamic Load Rating 7.82kN
Limiting Speed 15000rpm
Maximum Speed - Oil 14000rpm
951 Innen 1 virkedag(er) (UK-lager)
Pris ekskl. MVA Each
kr 40,67
(ekskl. MVA)
kr 50,84
(inkl. MVA)
enheter
Per unit
1 - 4
kr 40,67
5 - 9
kr 39,48
10 +
kr 38,08
Relaterte Produkter
SKF needle roller thrust bearings can support heavy ...
Description:
SKF needle roller thrust bearings can support heavy axial loads, are insensitive to shock loads and provide stiff bearing arrangements which require a minimum of axial space. Single direction bearings and can only accommodate axial loads acting in one directionParticularly ...
SKF Drawn cup needle roller bearings have a ...
Description:
SKF Drawn cup needle roller bearings have a deep drawn, thin-walled outer ring with open ends (indicated by the HK prefix).,They are characterised by very low sectional height and high load carrying capacity. Generally used directly on the shaft, which ...
SKF Needle Roller Bearings have low sectional height ...
Description:
SKF Needle Roller Bearings have low sectional height and very high load carrying capacity for their size. Needle roller without inner ringNeedle Roller Bearings with flanges in the outer ring and diameters up to and including 17mm are produced with ...
INA from Schaeffler drawn cup needle roller bearings ...
Description:
INA from Schaeffler drawn cup needle roller bearings with open ends and closed ends are bearings with a small radial section height. They comprise thin-walled, drawn cup outer rings and needle roller and cage assemblies which together form a complete ...