Phoenix Contact SUBCON-PLUS Series 2.77mm Pitch 9 Way Straight Male Screw Terminal D-sub Connector

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Phoenix Contact SUBCON-PLUS PROFIBUS D-Sub Connectors

Phoenix Contact SUBCON-PLUS PROFIBUS 9 pin D-sub connectors are designed for use in PROFIBUS systems up to 12 Mbps allowing fast connection of incoming and outgoing bus cables under field conditions. These SUBCON-PLUS PROFIBUS d-sub connectors have an integrated terminating resistor which can be activated externally by a slide switch, surge protection, a shielded ABS housing and can all be used with standard PROFIBUS cables with an outside diameter of 8mm (type A & B)

For PROFIBUS cable quick stripping tool see stock number 801-8967
For cable stripping tool see stock number 803-4326
For screwdriver see stock number 803-4351


A straight D-SUB connector from Phoenix Contact. The 9-contact connector is part of the SUB-CON PLUS series and is suitable for all Fast Connect PROFIBUS cables and RS-485 bus lines. This male, D-SUB connection is suitable for wire size 16 – 26 AWG.

Features and Benefits

• Male, Screw Terminal
• 9 Copper alloy contacts
• Pitch of 2.77mm
• Metal plated ABS housing
• Operating temperature of -20°C to +75°C



BUS connectors

Rewireable bus interface connectors suitable for Bitbus, CAN-Bus, Interbus-S (Fieldbus) and Profibus systems. Compact and high quality, the 9-pole sub-D housings are available in bus node or bus termination versions and are colour-coded for easy identification. Service nodes are also available for CAN-Bus and Profibus systems, allowing online programming and repair. Each interface comes with detailed assembly instructions and mounting accessories.

Available in versions with horizontal or vertical cable outlets
Fast and reliable connection via screw terminals on the PCB
Bus terminations include SMT termination resistors
Colour-coded bodies aid installation and repair
Safe ESD protection thanks to fully insulated housings
Supplied with reliable crimp strain relief

Attribute Value
Gender Male
Number of Contacts 9
Body Orientation Straight
Pitch 2.77mm
Contact Material Copper Alloy
Housing Material Metal Plated ABS
Current Rating 1A
Voltage Rating 60 V
Dimensions 58.2 x 31.5 x 17mm
Mounting Type Cable Mount
Depth 17mm
Minimum Operating Temperature -20°C
Length 58.2mm
Maximum Operating Temperature +70°C
Width 31.5mm
1 In stock for delivery within 1 working days
Price Each
kr 431,20
(exc. VAT)
kr 539,00
(inc. VAT)
Per unit
1 - 24
kr 431,20
25 - 74
kr 409,17
75 - 199
kr 389,03
200 - 399
kr 369,59
400 +
kr 351,04
Related Products
From Lapp, the Epic Series R range of ...
From Lapp, the Epic Series R range of circular connectors presents a compact solution to signal and power applications. Featuring a high contact density within a relatively small shell size, these connectors are ideal when space saving is a consideration.These ...
EC Plug 400 VDC, Rewireable, Straight, max. Cable ...
EC Plug 400 VDC, Rewireable, Straight, max. Cable Diameter 9.2 mm. Plug (rewireable): Screw-on mounting. Plug,, Protection class IWire size 0.75-1.5mm², 18AWG-16AWGCable diameter 6.4 - 9.2 mm. Hot plug rated for disconnecting under loads up to 2.6 kWIdeal for compact ...
For higher densities of circuit tracks and reduced ...
For higher densities of circuit tracks and reduced termination grid patterns. The 0.075 inch pitch Micro D connector significantly reduces connector size and weight. They share the same high performance components used in the rest of the Mil-PRF-83513 approved Micro ...
Stamped solder pins. With snap-in-clips and grounding board ...
Stamped solder pins. With snap-in-clips and grounding board locks. Perfor mance level 3Metal shell. Mounting height 6.3 mm. Flange thread 4-40 UNC.