Geckodrive GM215 Stepper Motor Controller 7 A, 18 80V dc, 2.5 x 2.5 x 0.85in

  • RS Stock No. 793-4133
  • Mfr. Part No. GM215
  • Brand Geckodrive
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

GM215 - Multi-mode Step Motor Controller

The GM215 is a stepper drive with a full motion controller. 15 operating modes include Motion Control, stand-alone control and sub-micro stepping for the smoothest possible operation of your stepper motor.

Midband resonance compensation
Motor smoothness, ARC Damping and VCO trim pots
Terminal block 12-position 5mm
Full motion controller with non-volatile memory
Capable of running as a standalone solution
Hard anodized electrically isolated heatsink
Maximum power dissipation of 13W
Recommended for NEMA 17-42 size motors
DIP switch settable current and option adjust

Specifications
Attribute Value
For Motor Type NEMA 17 to 42 Size
Current Rating 7 A
Board Supply Voltage 18 80V dc
Motor Supply Voltage 18 80V dc
Overall Length 2.5in
Overall Width 2.5in
Overall Depth 0.85in
3 In stock for delivery within 1 working days
Price Each
kr 3 448,95
(exc. VAT)
kr 4 311,19
(inc. VAT)
Units
Per unit
1 +
kr 3 448,95
Related Products
The XT IEC manual motor controllers from Eaton ...
Description:
The XT IEC manual motor controllers from Eaton combine a manual motor protector with an IEC contactor to provide complete motor protection. The open non-reversing controllers combine thermal overload protection, a motor disconnect function, magnetic short circuit protection and remote ...
Professional range of Eaton manual motor controllers from ...
Description:
Professional range of Eaton manual motor controllers from the XTFC series. The manual motor protector combined with an IEC contactor provides a complete motor protection solution. Visible trip indication. Test trip function. Class 10 overload protection. Wide range of coils ...
ST5-S and ST10-S step drives offer the following ...
Description:
ST5-S and ST10-S step drives offer the following features:. Pulse and directionCW/CCW pulseA/B quadrature. Analogue velocity (oscillator) mode. Host commands (SCL compatible)Si. Net hub (HUB 444, stock no. 455-867) compatibleST Configurator software for setup (software included).
ST5-Si and ST10-Si programmable step drives offer the ...
Description:
ST5-Si and ST10-Si programmable step drives offer the following features:. Software setup using ST Configurator (software included)Microstepping 200 to 58000 steps/rev.Pulse and direction: pulse/direction, CW/CCW, A/B quadrature. Host control mode. Idle current reduction. Anti-resonance. Torque ripple smoothing. ...