Geckodrive G540 Stepper Motor Controller 3.5 A, 18 → 50V dc, 161.8 x 60.2 x 31.75mm

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

G540 - Step Motor Drive 4-Axis

The G540 is a complete 4-axis system which plugs directly into a computer via the parallel port and to stepper motors through DB9 connectors.
It contains four G250 drives, a breakout board and a hard anodized aluminum case.


Stepper Motor Drive with 4-axis
Input frequency till 200kHz
Temperature range 0 to 70 °C

Note

The 4-axix drive contains the G250 stepper drive boards, stock no. 896-8553

Specifications
Attribute Value
For Motor Type Stepper Motor
Current Rating 3.5 A
Voltage Rating 50 V dc
Board Supply Voltage 18 → 50V dc
Motor Supply Voltage 50V dc
Overall Length 161.8mm
Overall Width 60.2mm
Overall Depth 31.75mm
1 In stock for delivery within 1 working days
Price Each
kr 5 718,84
(exc. VAT)
kr 7 148,55
(inc. VAT)
Units
Per unit
1 +
kr 5 718,84
Related Products
ST5-S and ST10-S step drives offer the following ...
Description:
ST5-S and ST10-S step drives offer the following features:. Pulse and directionCW/CCW pulseA/B quadrature. Analogue velocity (oscillator) mode. Host commands (SCL compatible)Si. Net hub (HUB 444, stock no. 455-867) compatibleST Configurator software for setup (software included).
ST5-Si and ST10-Si programmable step drives offer the ...
Description:
ST5-Si and ST10-Si programmable step drives offer the following features:. Software setup using ST Configurator (software included)Microstepping 200 to 58000 steps/rev.Pulse and direction: pulse/direction, CW/CCW, A/B quadrature. Host control mode. Idle current reduction. Anti-resonance. Torque ripple smoothing. ...
Drives motors up to 40V at 3.5AAdjustable drive ...
Description:
Drives motors up to 40V at 3.5AAdjustable drive current settings from 0.5 to 3.5AOutput overload protection. Synchronisation output for multi-axis systems. Full and half step drive modesTTL & CMOS compatible control interface. Output disable input5 & 12Vdc auxiliary outputs for ...
Drives motors up to 85V and 6A/phase. On ...
Description:
Drives motors up to 85V and 6A/phase. On board output drive current setting (2.5 to 6.0A)High efficiency chopped constant current power stage provides increased performance and reduced current consumption. Single supply rail simplifies power supply requirements. Short-circuit and open circuit ...