Microchip Technology USB3300-EZK-TR, USB Transceiver 3-Port, 3.3 V, 32-Pin QFN

  • RS Stock No. 177-9703
  • Mfr. Part No. USB3300-EZK-TR
  • Brand Microchip
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TW
Product Details

The USB3300 is an industrial temperature Hi-Speed USB Physical Layer Transceiver (PHY). The USB3300 uses a low pin count interface (ULPI) to connect to a ULPI compliant Link layer. The ULPI interface reduces the UTMI+ interface from 54 pins to 12 pins using a method of in-band signaling and status byte transfers between the Link and PHY. This PHY was designed from the start with the ULPI interface. No UTMI to ULPI wrappers are used in this design which provides a seamless ULPI to Link interface. The result is a PHY with a low latency transmit and receive time.

USB-IF Hi-Speed
Latch-Up performance exceeds 150 mA
ESD protection levels of ±8kV HBM without external protection devices
Includes full support for the optional On-The-Go (OTG) protocol
Supports the OTG Host Negotiation Protocol (HNP) and Session Request Protocol (SRP)
Allows host to turn VBUS off to conserve battery power in OTG applications
Internal 1.8 volt regulators allow operation from a single 3.3 volt supply

Specifications
Attribute Value
Number of Transceivers 3
Protocols Supported OTG, USB 2.0, UTMI + ULPI
Power Supply Type Single
ESD Protection Yes
Typical Single Supply Voltage 3.3 V
Mounting Type Surface Mount
Package Type QFN
Pin Count 32
Dimensions 5.1 x 5.1 x 0.95mm
Height 0.95mm
Length 5.1mm
Maximum Operating Temperature +85 °C
Minimum Operating Temperature -40 °C
Width 5.1mm
Available to back order for despatch 29.12.2020
Price Each (On a Reel of 5000)
kr 7,912
(exc. VAT)
kr 9,89
(inc. VAT)
Units
Per unit
Per Reel*
5000 +
kr 7,912
kr 39 560,00
*price indicative
Related Products
The MCP2210 device is a USB-to-SPI Master converter ...
Description:
The MCP2210 device is a USB-to-SPI Master converter which enables USB connectivity in applications that have an SPI interface. The device reduces external components by integrating the USB termination resistors.
The USB334x family of devices from Microchip are ...
Description:
The USB334x family of devices from Microchip are Hi-Speed USB2.0 ULPI Transceivers that support USB-IF Battery Charging 1.2 (BC 1.2) specification. USB-IF Battery Charging 1.2 Specification Compliant. Link Power Management (LPM) Specification Compliant. Integrated ESD protection circuits – Up to ...