Lantronix XPCW1001000RP-K 3.3V WiFi Module, ARP, Auto-IP, DHCP, DNS, ICMP, TCP/IP, UDP/IP

  • RS Stock No. 817-6427
  • Mfr. Part No. XPCW1001000RP-K
  • Brand Lantronix
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

xPico WiFi Raspberry Pi Plate

The Lantronix xPico WiFi Raspberry Pi Plate brings powerful WiFi connectivity to any Raspberry Pi-based project. Based on the xPico WiFi Embedded Device Server Module, the Plate can be set up as a Soft Access Point (AP) and/or as a Client server providing WiFi communication with an AP for a mobile device.

XPCW1001000RP-K xPico WiFi Raspberry Pi Plate
Compatible with the Raspberry Pi 1 Single-Board Computer
XPW100100B-01 xPico WiFi Module
Connector for Raspberry Pi GPIO 26-pin header
MiniUSB Device socket
MiniUSB socket for UART-USB bridge connection
SMA antenna connector
Current monitoring header
Set Default pushbutton
Reset pushbutton
Wake-Up pushbutton
Status LED
AP association LED
Power LED
Power supplied from Raspberry Pi or USB connection

XPW100100B-01 xPico WiFi Module
IEEE 802.11 b/g and IEEE 802.11n (single stream) WLAN interface (2.4 GHz only)
IEEE 802.11 d/h/i/j/k/w/r
WPS 2.0 support
Security: IEEE 802.11i support: WPA-Personal, WPA2-Personal
AES-256 encryption
Soft Access Point with DHCP server and Client Mode
Lantronix SmartRoam™ Technology
QuickConnect: Dynamic Profiles facilitate easy and rapid connections to access points
Complete device server application with full IP Stack and web server
Embedded Network Protocols: TCP/IP, UDP/IP, DHCP, ARP, ICMP, DHCP, Auto-IP, DNS, SNMPv1
ARM Cortex-M3 core processor with 1MB Flash memory, 128KB SRAM
1MB serial SPI Flash memory
Dual UART serial port with data rate of up to 921kbps
SPI bus with 20MHz clock rate
USB 2.0 full rate device mode
u.FL connector for external antenna
Power supply: +3.3Vdc
Low power (6μA Standby)
Dimensions: 24 x 16.5 x 5.64mm
Operating temperature range: -40 to +85°C
Certifications: FCC Class B, UL and EN EMC, Japan
Applications: Local communication for the Internet-of-Things (IoT)

Note

xPico WiFi module available separately under RS Part No. 797-6686

Supplied with

2dBi swivel-type antenna

Specifications
Attribute Value
Supported Protocol ARP, Auto-IP, DHCP, DNS, ICMP, TCP/IP, UDP/IP
Supported Security Standards WPA, WPA2
Supported Bus Interfaces A serial CMOS Ports, Lantronix tunneling application, SPI, 300 to 921.6 Kbps
Supply Voltage 3.3V
Maximum Operating Temperature +85°C
Minimum Operating Temperature -40°C
Discontinued product
Related Products
The 4D Systems MOTG (Modules on the Go) ...
Description:
The 4D Systems MOTG (Modules on the Go) product family provides an innovative plug and play solution for adding key functionalities to 4D Systems gen4 LCD Display Modules.Utilising a modular concept, the MOTG range provides a simple method for swift ...
The T7G/R7G series are shielded narrowband RF transmitter ...
Description:
The T7G/R7G series are shielded narrowband RF transmitter and receiver modules, which enable the implementation of a remote control or simple telemetry link. RF Operating Frequency: 434MHz ISM band. Channel Bandwidth: 12.5k. HzRF Output Power: up to +16d. BmReceiver Sensitivity: ...
6 switch inputs and outputs. Stand by mode ...
Description:
6 switch inputs and outputs. Stand by mode in TX module4 operation modes in RX module. Photo MOS relay in RXLow voltage and consumption current. Compact bodyMSK modem equipped. Long range control.
SMD type module.Data rates up to MCS9(433.3Mbps)BT4.2(supports Bluetooth ...
Description:
SMD type module.Data rates up to MCS9(433.3Mbps)BT4.2(supports Bluetooth Low Energy). Class2 supports.Low standby current (with low power operation)Transmit data rate : 11/5.5/2/1 Mbps(11b), 54/48/36/24/18/12/9/6 Mbps(11a/g),150∼6.5 Mbps (11n, MCS7∼0, HT20/40), 433.3 ∼ 7.22 Mbps (11ac MCS9∼0, HT80 )Channel Number ...