SKF 6205-2RSH/C3WT 1 Row Ball Bearing - 25 mm ID, 52 mm OD

This ball bearing is a single-row deep-groove component engineered for rotational support in machinery where compact, sealed bearings are required. It combines steel rolling elements and a sheet-metal cage to manage radial and axial loads while operating at elevated shaft speeds. The unit is suited to installations requiring a cylindrical bore and a defined internal clearance for controlled running behaviour.

• Sheet-metal cage reduces friction for smoother rotation
• C3 internal clearance accommodates thermal expansion under load
• Dynamic load capacity 14.8 kN prolongs service under cyclical forces
• Static load capacity 7.8 kN resists deformation during standstill loads
• Sealed on both sides to limit contamination ingress

• Suitable for high-speed motor shafts up to 8,500 r/min
• Used with electric drives requiring cylindrical bores
• Ideal for replacement in rotating equipment with limited width
• Can be used for gearboxes needing sealed bearings

Continuous operation should consider the limiting speed of 8,500 r/min to match the bearing's intended rotational capability.

Both sides are fitted with Seals to reduce ingress and preserve lubricant life.

The specified C3 clearance provides additional internal space to accommodate thermal growth and prevents preload increase in tight fits.

The balls and races are fabricated from steel, while the retaining component is MADE from sheet metal.