SKF 6312-2Z Single Row Deep Groove Ball Bearing- Both Sides Shielded 60mm I.D, 130mm O.D

SKF shielded deep groove ball bearings are versatile ball bearings that suit high and very high speeds, they will accommodate both radial load and axial load in both directions. The ball bearings need very little maintenance. SKF deep groove ball bearings come in a range of different sizes. This range is single row ball bearings.

Shielded (2Z) bearings are fitted with two metal dust shields to prevent the ingress of dirt and foreign matter. 2RZ bearings are 2Z bearings fitted with two low friction seals.

- Primarily intended for applications where the bearing inner ring rotates
- Fitted in the outer ring and form a narrow gap with the inner ring
- Both standard and C3 clearance available
- Protect from dirt and debris without friction losses

Application Information
-Food and Beverage Industry
-Pharmaceutica
-Medical industry
-Engines and Pumps
-Medical Industry
-Printing

More Information

What are deep groove ball bearings?

These are the most popular type of bearings and consists of an inner ring, outer ring, cage and the ball bearings. The bearings have deep raceway grooves. These type of bearings deliver high performance and high load capacity.

Why used shielded ball bearings?

Shielded ball bearings have a metal or plastic shield that is secured to the outer race of the bearing on each side of the bearing. Ball bearings that spin at high speeds require lubrication and a clean environment By having the ball bearings shielded this offers better protection against dirt and grease therefore the ball bearings have a longer lifespan.

This ball bearing is crucial for a variety of applications in sectors such as automation, electronics, electrical, and mechanical. Known for its durable design, this steel ball bearing offers efficient performance and longevity, making it suitable for industrial environments. It is designed to reduce friction and enhance mechanical efficiency.

• Single row design promotes smooth operation
• Shielded on both sides to guard against contaminants
• Constructed from high-quality steel for durability
• Dynamic load rating of 85.2kN accommodates heavy loads
• Inside diameter of 60mm ensures versatile compatibility
• Suitable for high-speed applications due to plain race type

• Utilised in electric motor assemblies within industrial equipment
• Effective in conveyor systems for smooth functioning
• Ideal for pumps that require high reliability and efficiency
• Employed in machinery operating under harsh conditions
• Applicable in automotive situations where performance is essential

Regular lubrication in accordance with your application conditions is necessary for optimal performance.

While it is designed for general industrial use, it may not be suitable for extreme temperature conditions

Routine inspections for wear and tear, along with adequate lubrication, are recommended to extend its lifespan.

Yes, it is commonly used in machinery such as conveyors and electric motors that require dependable bearings.

Lifespan can vary based on operating conditions