Siemens DIN Rail Circuit Trip

This control switch is a DIN rail-mounted remote switching device designed for industrial automation panels. It operates from an AC control supply with a setpoint of 230 V and provides two normally open contacts for switching loads up to 16 A. The unit offers galvanic isolation between Coil and contacts and is intended for use where Compact modular width and simple mechanical latching are required.

• 16 A rated switching current delivers high load-handling capacity
• 2 NO contacts enable straightforward normally open control schemes
• Screw terminals accept 1 mm² to 6 mm² conductors for secure connections
• Mechanical latching provides defined state retention after actuation
• Electrical endurance 50,000 cycles supports long service intervals

• Suitable for DIN rail control panels in industrial automation
• Can be used for switching incandescent and fluorescent lighting loads
• Ideal for remote switching of 230 V AC control circuits
• Used with control systems requiring galvanic Coil to contact isolation

The control input accepts AC with a setpoint of 230 V and an operating range from 184 V to 253 V.

It switches up to 16 A at cos φ 0.6 and provides specific apparent power capacities for fluorescent lamp configurations.

It uses six screw terminals for connections with tightening torque between 0.8 N·m and 1 N·m.

It is designed for ambient temperatures from -10 °C to 40 °C and accommodates up to 95% relative humidity per DIN 50015.