Kubler K 07.20 Counter, Counter, 7 Digit, 10 Hz 115V ac
- RS Stock No.:
- 296-4518
- Mfr. Part No.:
- 1.130.200.054
- Brand:
- Kubler
Image representative of range
Subtotal (1 unit)*
Kr. 451,54
(exc. VAT)
Kr. 564,42
(inc. VAT)
FREE delivery for online orders over 500,00 kr
Temporarily out of stock
- Shipping from 22 April 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit |
|---|---|
| 1 + | Kr. 451,54 |
*price indicative
- RS Stock No.:
- 296-4518
- Mfr. Part No.:
- 1.130.200.054
- Brand:
- Kubler
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Kubler | |
| Product Type | Counter | |
| Function | Counter | |
| Connection Type | Solder Pin | |
| Reset Method | No Reset | |
| Number of Digits | 7 | |
| Direction of Rotation | Up | |
| Mount Type | Panel Mount | |
| Maximum Supply Voltage | 115V ac | |
| Count Direction | Up | |
| Digit Height | 4mm | |
| Minimum Operating Temperature | -10°C | |
| Maximum Operating Temperature | 60°C | |
| Standards/Approvals | No | |
| Weight | 18g | |
| Depth | 32.7mm | |
| Maximum Count Frequency | 10Hz | |
| Cutout Height | 13mm | |
| Cutout Width | 30mm | |
| Series | K 07.20 | |
| Meter Type | Electromechanical | |
| Select all | ||
|---|---|---|
Brand Kubler | ||
Product Type Counter | ||
Function Counter | ||
Connection Type Solder Pin | ||
Reset Method No Reset | ||
Number of Digits 7 | ||
Direction of Rotation Up | ||
Mount Type Panel Mount | ||
Maximum Supply Voltage 115V ac | ||
Count Direction Up | ||
Digit Height 4mm | ||
Minimum Operating Temperature -10°C | ||
Maximum Operating Temperature 60°C | ||
Standards/Approvals No | ||
Weight 18g | ||
Depth 32.7mm | ||
Maximum Count Frequency 10Hz | ||
Cutout Height 13mm | ||
Cutout Width 30mm | ||
Series K 07.20 | ||
Meter Type Electromechanical | ||
- COO (Country of Origin):
- DE
Non Reset Totalising Counters
Magnifying lens increases readout to 4mm
Retains count during power failure
Unaffected by shock, vibration or magnetic fields
PCB, Surface & DIN Rail Mounting
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the count or reset coil terminals.,Count rate of all products is 10Hz.