KEMET USEQGCDAC82M00 Carbon Dioxide Air Quality Sensor for Breath Actuated Dispenser, Office, Safety, HVAC,
- RS Stock No.:
- 206-6594
- Mfr. Part No.:
- USEQGCDAC82M00
- Brand:
- KEMET
Currently unavailable
We don't know if this item will be back in stock, RS intend to remove it from our range soon.
- RS Stock No.:
- 206-6594
- Mfr. Part No.:
- USEQGCDAC82M00
- Brand:
- KEMET
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | KEMET | |
| Gases Detected | Carbon Dioxide | |
| Product Type | Air Quality Sensor | |
| Response Time | 12ms | |
| Application | Breath Actuated Dispenser, Office, Safety, HVAC, Environmental Monitoring, Breath Rate Measurement, Automotive Cabin Air Quality, Gas, Building Technology, Medical Capnography, Exhaust, Gas Flue, Car, Industrial Process, Pollution Air Quality In Home, Home, Anaesthesia | |
| Sub Type | Sensor | |
| Minimum Supply Voltage | 2.7V | |
| Maximum Supply Voltage | 8V | |
| Power Source | Mains | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 3 | |
| Maximum Operating Temperature | 85°C | |
| Package Type | TO-39 | |
| Height | 9.15mm | |
| Standards/Approvals | No | |
| Series | QGC | |
| Length | 19.5mm | |
| Weight | 970mg | |
| Automotive Standard | No | |
| Select all | ||
|---|---|---|
Brand KEMET | ||
Gases Detected Carbon Dioxide | ||
Product Type Air Quality Sensor | ||
Response Time 12ms | ||
Application Breath Actuated Dispenser, Office, Safety, HVAC, Environmental Monitoring, Breath Rate Measurement, Automotive Cabin Air Quality, Gas, Building Technology, Medical Capnography, Exhaust, Gas Flue, Car, Industrial Process, Pollution Air Quality In Home, Home, Anaesthesia | ||
Sub Type Sensor | ||
Minimum Supply Voltage 2.7V | ||
Maximum Supply Voltage 8V | ||
Power Source Mains | ||
Minimum Operating Temperature -40°C | ||
Pin Count 3 | ||
Maximum Operating Temperature 85°C | ||
Package Type TO-39 | ||
Height 9.15mm | ||
Standards/Approvals No | ||
Series QGC | ||
Length 19.5mm | ||
Weight 970mg | ||
Automotive Standard No | ||
- COO (Country of Origin):
- MY
The KEMET QGC thin film pyroelectric gas sensors have reduced physical size but still provide high sensitivity with fast frequency operation. It employs a highly stable dual sensor in a TO39 package. It also has an internal CMOS operational amplifier with a 10 GO feedback resistor outputting a voltage signal centred around half the supply rail.
Reliable operation over a wide frequency range
Low noise circuit
Analogue output
Related links
- KEMET Carbon Dioxide Air Quality Sensor for Breath Actuated Dispenser Safety Environmental Monitoring,
- Amphenol Advanced Sensors T6615-50K Carbon Dioxide Air Quality Sensor for Automotive Temperature Sensing
- KEMET Carbon Dioxide Air Quality Sensor
- KEMET USEQGCDAC82100 Carbon Dioxide Air Quality Sensor
- KEMET USEQGCDAC82L00 Carbon Dioxide Air Quality Sensor
- KEMET USEQGCDAC82S00 Carbon Dioxide Air Quality Sensor
- Honeywell HPMA115C0-004 Carbon Dioxide Air Quality Sensor for Indoor Air Quality Monitors, Hand Held Air Quality
- Renesas Electronics ZMOD4410AI1V Carbon Dioxide Air Quality Sensor for Monitor Home