Nexperia 74HC574D,652 8 Octal D Type Flip Flop HC, 3 State, 20-Pin SOIC
- RS Stock No.:
- 124-2263
- Mfr. Part No.:
- 74HC574D,652
- Brand:
- Nexperia
Currently unavailable
We don't know if this item will be back in stock, RS intend to remove it from our range soon.
- RS Stock No.:
- 124-2263
- Mfr. Part No.:
- 74HC574D,652
- Brand:
- Nexperia
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Nexperia | |
| Product Type | Octal D Type Flip Flop | |
| Logic Family | HC | |
| Input Type | Single Ended | |
| Output Type | 3 State | |
| Clock Frequency | 24MHz | |
| Polarity | Non-Inverting | |
| Mount Type | Surface | |
| Minimum Supply Voltage | 2V | |
| Package Type | SOIC | |
| Maximum Supply Voltage | 6V | |
| Pin Count | 20 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Propagation Delay Time @ CL | 45ns | |
| Trigger Type | Positive Edge | |
| Flip-Flop Type | Type D | |
| Maximum Operating Temperature | 125°C | |
| Number of Elements per Chip | 8 | |
| Height | 2.45mm | |
| Length | 13mm | |
| Series | 74HC | |
| Standards/Approvals | JEDEC No. 7A | |
| Automotive Standard | No | |
| Select all | ||
|---|---|---|
Brand Nexperia | ||
Product Type Octal D Type Flip Flop | ||
Logic Family HC | ||
Input Type Single Ended | ||
Output Type 3 State | ||
Clock Frequency 24MHz | ||
Polarity Non-Inverting | ||
Mount Type Surface | ||
Minimum Supply Voltage 2V | ||
Package Type SOIC | ||
Maximum Supply Voltage 6V | ||
Pin Count 20 | ||
Minimum Operating Temperature -40°C | ||
Maximum Propagation Delay Time @ CL 45ns | ||
Trigger Type Positive Edge | ||
Flip-Flop Type Type D | ||
Maximum Operating Temperature 125°C | ||
Number of Elements per Chip 8 | ||
Height 2.45mm | ||
Length 13mm | ||
Series 74HC | ||
Standards/Approvals JEDEC No. 7A | ||
Automotive Standard No | ||
- COO (Country of Origin):
- TH
The 74HC574, 74HCT574 is an 8-bit positive-edge triggered D-type flip-flop with 3-state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP) transition. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the flip-flops. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
Mixed 5 V and 3.3 V applications
Improved signal integrity with integrated termination resistors
High noise immunity
Flow through pin out for easy layout
Wide supply voltage range
Low propagation delay
Overvoltage tolerant input options
Integrated source termination resistor options
Bus hold options
Key applications
Frequency division
Controlled delays
Interface between asynchronous and synchronous systems
Related links
- Nexperia 74HC574D 3-State, 20-Pin SOIC
- Nexperia 74HCT574D 3-State, 20-Pin SOIC
- onsemi MM74HC74AM 2 Octal D Type Flip Flop HC 14-Pin SOIC
- onsemi 2 Octal D Type Flip Flop HC 14-Pin SOIC
- Texas Instruments SN74AC574N Octal D Type Flip Flop IC 20-Pin PDIP
- Texas Instruments SN74HC574PWR Octal D Type Flip Flop IC 20-Pin TSSOP
- Texas Instruments Octal D Type Flip Flop LVC 20-Pin TSSOP (PW)
- Texas Instruments SN74LVC574APW Octal D Type Flip Flop LVC 20-Pin TSSOP (PW)