RS PRO Light Transformer 150 W, 230 to 240 V ac, 12 V

View all Lighting Transformers

Subtotal (1 unit)*

Kr. 473,39

(exc. VAT)

Kr. 591,74

(inc. VAT)

Add to Basket
Select or type quantity
Temporarily out of stock
  • 31 unit(s) shipping from 23 March 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units
Per unit
1 +Kr. 473,39

*price indicative

RS Stock No.:
714-1381
Brand:
RS PRO
Find similar products by selecting one or more attributes.
Select all

Brand

RS PRO

Primary Voltage

230 to 240 V ac

Product Type

Light Transformer

Secondary Voltage

12 V

Power

150W

Minimum Load Requirement

30W

Maximum Operating Temperature

70°C

Minimum Operating Temperature

40°C

Sub Type

Dimmable Electronic Transformer

Termination Type

Screw

Mount Type

Screw

Weight

205g

Standards/Approvals

EN 61347-2-2, VDE 0710-T14, EN 61347-1, EN 61547, EN 55015, EN 60598-1, EN 61000-3-2

Length

190mm

Series

WOLF 150 - WX 150

Depth

39mm

Width

49 mm

Dimming Method

Trailing Edge

Minimum Operating Frequency

50Hz

Maximum Operating Frequency

60Hz

COO (Country of Origin):
IT

RS PRO Dimmable Electronic Transformer


Use this independent transformer in conjunction with 12/ 24 V halogen lamps. This clever device offers protection against electric shock following direct or indirect contact and is dimmable by trailing or leading-edge dimmer. Our electronic transformer come complete with opposite inlet and outlet terminals, terminal cover, and cable retainer.

Features and Benefits


  • Independent transformer

  • Dimmable

  • Terminal cover and cable retainer

  • Opposite inlet and outlet terminals

  • Input terminals with loop possibility on feed

  • Double terminal block on the 230 V primary circuit (2,5 mm2 terminal area)

  • Triple terminal block on the 12 V secondary circuit (2,5 mm2 terminal area)

  • Transformer is secured by means of threaded slots

    • General Specification


  • Suitable for halogen lamps 12/24 V

  • Clamping screws on primary and secondary circuits for cables with diameter: 3 mm min. - 8 mm max.

  • Max 18 mm cable peel-off

  • Dimensions: 190 mm x 39 mm x 49 mm

  • Weight: 205 g

  • IP Rating: IP20

    • Protection


  • Protected against overheating and short-circuits

  • Protected against mains voltage spikes

  • Protected against overloads

  • Class II protection

    • RS PRO


    RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.

    Low Voltage Lighting Transformers


    Dimming Methods (where applicable):

    Leading Edge:

    The control device is either a thyristor or triac which blocks power until they are switched on by the control signal. At that point the current flows almost instantaneously and continues to flow until the end of the half cycle of the mains waveform. When the signal reaches zero, the device turns off and no more current is passed until it is triggered again. Turning the power on and off in this manner averages out creating a constant intensity level and by altering the precise trigger point over a period of time the lamp can be dimmed.

    Trailing Edge:

    Since this method of dimming uses transistor technology it is not limited to just switching, therefore current can be controlled gradually. Transistors can be programmed to pass current at the start of each half cycle, and gradually switch off later. This will control the full amount of power reaching the lamp without the side effects of a step increase in current.

    Related links