Recently searched

    RS PRO Single Sided Matrix Board FR4 1.02mm Holes, 2.54 x 2.54mm Pitch, 220 x 100 x 1.6mm

    RS Stock No.:
    100-4514
    Brand:
    RS PRO
    RS PRO
    View all Matrix Boards
    Available to back order for despatch 26.10.2022
    Add to Basket
    Units

    Added

    Price Each

    kr 522,30

    (exc. VAT)

    kr 652,88

    (inc. VAT)

    UnitsPer unit
    1 - 4kr 522,30
    5 - 9kr 496,17
    10 - 39kr 459,59
    40 +kr 417,88
    RS Stock No.:
    100-4514
    Brand:
    RS PRO
    COO (Country of Origin):
    GB

    Technical Reference


    Legislation and Compliance

    COO (Country of Origin):
    GB

    Product Details

    KM6 Veroboard® boards for DIN 41612 connectors


    Single-sided boards combining the advantages of Veroboard, the flexibility of Eurocards and DIN 41612 connectors.
    For wiring by wrapping applications, spacing of 3.81 on the double height boards keeps the board route aligned on the grid of the adjacent connectors.
    Silk-screened component installation grid.
    The cutter (stock number 543-535) allows rapid completion of a circuit by interrupting the copper tracks on request.



    DIN Type Stripboards


    Suitable for use with the KM6-II eurocard sub-rack systems


    The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way DIN 41612 indirect edge connectors may be fitted at either end.
    The 3U (100x160) and 6U (233.4x160) boards are available with plated through holes (pth) as an alternative to the standard types. These boards have the added advantage of linking the top with the bottom pads directly via the holes, thereby dispensing with the need to fit linking pins, etc. Also the integrity of the joint is improved as the solder forms round the component lead on both surfaces, in addition to flowing through the hole. This helps to produce a solid and reliable connection, which is very important in applications where a high degree of vibration may be encountered.
    Eurocards are manufactured from either epoxy glass material (blue) to BS4584 Part 3 or 16, or SRBP (synthetic resin bonded paper) material to BS4584 Part 5. Card thickness is 1.6mm. Copper 305g/m2 (1oz/ft2). Holes 1.0mm (0.040in.) dia. are pre-drilled on a 2.54mm matrix and all cards can be used with indirect edge connectors to DIN41612 (see Connectors/Terminals) except SRBP stripboard.

    Note

    Single-sided microboards have the same wiring pattern as the double-sided types, but omit the ground plane and 0 Volt rails on the component side of the card.


    Specifications

    AttributeValue
    Number of Sides1
    Hole Pitch2.54 x 2.54mm
    Dimensions220 x 100 x 1.6mm
    Length220mm
    Width100mm
    Thickness1.6mm
    Base MaterialEpoxy Glass Fabric Laminate
    Hole Diameter1.02mm
    FR Material GradeFR4
    ConnectionDIN 41612
    Available to back order for despatch 26.10.2022
    Add to Basket
    Units

    Added

    Price Each

    kr 522,30

    (exc. VAT)

    kr 652,88

    (inc. VAT)

    UnitsPer unit
    1 - 4kr 522,30
    5 - 9kr 496,17
    10 - 39kr 459,59
    40 +kr 417,88