Honeywell Short Lever Micro Switch, Solder Terminal, 6 A, SPCO, IP40

View all Micro Switches
Currently unavailable
We don't know if this item will be back in stock, RS intend to remove it from our range soon.
RS Stock No.:
205-6076
Mfr. Part No.:
ZM160C10B01
Brand:
Honeywell
Find similar products by selecting one or more attributes.
Select all

Brand

Honeywell

Actuator Type

Short Lever

Product Type

Micro Switch

Terminal Type

Solder

Switch Contact Current

6 A

Contact Configuration

SPCO

IP Rating

IP40

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

125°C

Microswitch Type

Subminiature

Series

ZM1

Hazardous Area Certification

No

Standards/Approvals

ENEC to IEC 61058-1, cUL to UL 61058-1, CQC to GB 15092.1, CQC, CE, RoHS, REACH, UL

Mechanical Life

400Cycles

Depth

10.2mm

Length

19.8mm

Honeywell ZM1 Series Micro Switch, 6A Switch Contact Current, Short Lever Actuator Type - ZM160C10B01


This micro switch is a Compact electromechanical actuator designed for precise switching in control and sensing circuits. It provides a short lever actuation for quick, accurate input and connects via solder terminals for PCB mounting. The device is suitable for environments requiring moderate ingress protection and extended temperature range operation.

Features and Benefits:


• Short lever actuator enables rapid, repeatable switching response
• Single-pole changeover contacts carry up to 6A for power handling
• Solder Terminal simplifies PCB assembly and secure electrical connection
• Rated for operation between -40°C and 125°C for varied thermal conditions
• Mechanical endurance of 400 cycles supports intermittent actuation tasks
• IP40 ingress protection reduces dust-related contact issues

Applications


• Suitable for limit switching in automated machinery
• Ideal for control panels and Interface assemblies on PCBs
• Used with electromechanical relays for signal routing and safety interlocks
• Can be used for position detection in small mechanical systems

What contact arrangement does it offer and how does that affect control circuits?


It uses a single-pole changeover contact configuration, allowing one input to switch between two outputs for simple make/break logic functions.

Which Terminal style is provided and what assembly methods suit it?


The switch has solder terminals, making it appropriate for reflow or hand-soldering on printed circuit boards where a permanent connection is required.

How does the ingress protection rating influence installation?


An IP40 rating means the device is protected against solid objects greater than 1mm but not against water, so it should be mounted in dry or enclosed locations.

What approvals and standards support its use in regulated equipment?


It holds multiple approvals to recognised standards including ENEC to IEC 61058-1, cUL to UL 61058-1 and CQC, alongside CE, RoHS and REACH compliance, allowing integration into certified electrical products.

Related links