Vishay SQS201CENW Type P-Channel Single MOSFETs, -16 A, -100 V Enhancement, 8-Pin PowerPAK SQS201CENW-T1_GE3

RS Stock No.:: 653-188
Mfr. Part No.:: SQS201CENW-T1_GE3
Brand:: Vishay

Vishay SQS201CENW Type P-Channel Single MOSFETs, -16 A, -100 V Enhancement, 8-Pin PowerPAK SQS201CENW-T1_GE3

Subtotal (1 reel of 3000 units)*

Kr. 16 533,00

(exc. VAT)

Kr. 20 667,00

(inc. VAT)

Stock information currently inaccessible - Please check back later

Units	Per unit	Per Reel*
3000 +	Kr. 5,511	Kr. 16 533,00

*price indicative

RS Stock No.:: 653-188
Mfr. Part No.:: SQS201CENW-T1_GE3
Brand:: Vishay

Specifications

Technical Reference

Legislation and Compliance

Product Details

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	Vishay
	Channel Type	Type P
	Product Type	Single MOSFETs
	Maximum Continuous Drain Current Id	-16A
	Maximum Drain Source Voltage Vds	-100V
	Package Type	PowerPAK
	Series	SQS201CENW
	Mount Type	PCB
	Pin Count	8
	Maximum Drain Source Resistance Rds	0.0800Ω
	Channel Mode	Enhancement
	Typical Gate Charge Qg @ Vgs	26nC
	Maximum Power Dissipation Pd	62.5W
	Maximum Gate Source Voltage Vgs	20V
	Forward Voltage Vf	-1.1V
	Minimum Operating Temperature	-55°C
	Maximum Operating Temperature	175°C
	Standards/Approvals	RoHS
	Width	3.30mm
	Length	3.30mm
	Height	0.41mm
	Automotive Standard	AEC-Q101

	Select all
	Brand Vishay
	Channel Type Type P
	Product Type Single MOSFETs
	Maximum Continuous Drain Current Id -16A
	Maximum Drain Source Voltage Vds -100V
	Package Type PowerPAK
	Series SQS201CENW
	Mount Type PCB
	Pin Count 8
	Maximum Drain Source Resistance Rds 0.0800Ω
	Channel Mode Enhancement
	Typical Gate Charge Qg @ Vgs 26nC
	Maximum Power Dissipation Pd 62.5W
	Maximum Gate Source Voltage Vgs 20V
	Forward Voltage Vf -1.1V
	Minimum Operating Temperature -55°C
	Maximum Operating Temperature 175°C
	Standards/Approvals RoHS
	Width 3.30mm
	Length 3.30mm
	Height 0.41mm
	Automotive Standard AEC-Q101

Datasheet - SQS201CENW-T1_GE3

COO (Country of Origin):: CN

Vishay SQS201CENW Series Single MOSFETs, -100V Maximum Drain Source Voltage, -16A Maximum Continuous Drain Current - SQS201CENW-T1_GE3

This single MOSFET is a P-channel enhancement device intended for power-switching functions in electronic systems, particularly where automotive-grade robustness is required. It is designed for PCB mounting in a PowerPAK package and offers a balance of current handling and voltage capability suited to demanding industrial and vehicular control environments.

Features and Benefits:

• P-channel device enabling high-side switching in circuits • 100V drain-to-source rating allowing large voltage margins • -16A continuous drain current for substantial load capability • 0.08Ω Rds(on) minimising conduction losses under load • 26nC typical gate charge supporting moderate switching speeds • 62.5W power dissipation handling significant thermal stress

Applications

• Suitable for high-side power switching in automotive modules • Ideal for motor-drive protection and control circuits • Used for battery management and power distribution systems • Can be used for industrial automation logic-level power stages

What gate voltage limits should be observed during design?

The gate-to-source excursion must not exceed 20V to prevent device stress.

How does the device behave at temperature extremes in practice?

It is specified to operate from -55°C up to 175°C, enabling use in harsh thermal environments without exceeding its rated limits.

What package considerations affect PCB layout and cooling?

The PowerPAK 8-pin footprint influences thermal conduction paths and requires adequate PCB copper for heat dissipation to make use of the 62.5W power-handling capacity.

Are there specific standards influencing selection for automotive use?

It meets the AEC‑Q101 automotive qualification, indicating suitability for vehicle electronic applications under that standard.