Telemecanique Sensors XY2CE Rope Pull Switch 142 mm, Right Side, 2 NO/2 NC

View all Rope Pull Switches

Subtotal (1 unit)*

Kr. 6 069,53

(exc. VAT)

Kr. 7 586,91

(inc. VAT)

Add to Basket
Select or type quantity
In Stock
  • 4 unit(s) ready to ship
  • Plus 2 unit(s) ready to ship from another location
  • Plus 6 unit(s) shipping from 26 March 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units
Per unit
1 +Kr. 6 069,53

*price indicative

RS Stock No.:
742-3829
Mfr. Part No.:
XY2CE1A296
Brand:
Telemecanique Sensors
Find similar products by selecting one or more attributes.
Select all

Brand

Telemecanique Sensors

Product Type

Rope Pull Switch

Contact Configuration

2 NO/2 NC

Mounting Orientation

Right Side

IP Rating

IP65

Number of Cable Entries

3

Series

XY2CE

Reset Button

Yes

Contact AC Voltage

240V ac

Contact DC Voltage

250V dc

Minimum Operating Temperature

-25°C

E-Stop Button

Yes

Contact Current

3A

Maximum Operating Temperature

70°C

Standards/Approvals

No

Length

142mm

Depth

105mm

Housing Material

Zamak, Stainless Steel

Width

229 mm

Hazardous Area Certification

No

Conduit Entry

PG13.5

Mechanical Life

10Cycles

Telemecanique XY2CE & XY2CB Emergency Stop Rope Pull Switches


These emergency stop trip wire switches are designed to reduce the risk of injury to persons and damage either to machines or work in progress. They can be tripped by a single human action when a normal emergency stop function is not available and will also trip in the event of the trip wire breaking.

Switches incorporate positive opening operation contacts, the tripping of the switch being made with positive action

The switch latches in the tripped position (N/C safety contact(s) open). The function of the N/O contact is purely for signalling

Incorporates a reset button, which re-closes the safety contact(s), restarting of the machine must only be achieved by manual operation of a control device within the machine start circuit, remote to the trip wire switch

Recommended distance between cable supports is 15m (for model XY2-CB30 a distance of 20m is recommended)

The XY2 CE1A296 comes with a pilot light (direct supply)

Note

The XY2 CB switch must not be used if the installation requires that the trip wire be angled but the XY2 CE switch can. In this case, the total sum of the angles through which the trip wire bends must not exceed 180°.

Standards

EN/ISO 13850:2006

Related links