SKF Nitrile Rubber (NBR) Seal, 30 mm ID, 52 mm OD, 7 mm

View all Seals

Subtotal (1 pack of 10 units)*

Kr. 187,35

(exc. VAT)

Kr. 234,19

(inc. VAT)

Add to Basket
Select or type quantity
In Stock
  • 70 unit(s) ready to ship
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units
Per unit
Per Pack*
10 +Kr. 18,735Kr. 187,35

*price indicative

RS Stock No.:
267-3389
Mfr. Part No.:
30X52X7 HMS5 RG
Brand:
SKF
Find similar products by selecting one or more attributes.
Select all

Brand

SKF

Inside Diameter

30 mm

Product Type

Seal

Outside Diameter

52 mm

Seal Type

Rotary Shaft Seal

Thickness

7mm

Seal Material

Nitrile Rubber (NBR)

COO (Country of Origin):
CN

SKF Seal, 30mm Inside Diameter, 52mm Outside Diameter - 30X52X7 HMS5 RG


This seal is a rotary shaft sealing element designed to separate rotating and stationary components and retain oil or grease within assemblies. It features a rubber outer diameter and a single elastomeric sealing lip fitted with a garter spring to maintain radial contact, making it suitable for rotating shafts in industrial equipment.

Features & Benefits


• Nitrile rubber lip provides compatible resistance to oils and greases
• Garter spring maintains a consistent radial load during rotation
• Handles circumferential speed up to 5.77 m/s for moderate-speed shafts
• Operates between −40°C to 100°C for a broad temperature range
• Withstands short-term peaks to 120°C for transient thermal events

Applications


• Suitable for Seals in motors and pumps requiring oil retention
• Ideal for rotating shafts in automation equipment
• Used in gearboxes where grease containment is required
• Can be used for shaft interfaces in electrical actuators

What shaft sizes will this component accept?


It is engineered to fit a 30mm shaft diameter and locate in a 52mm housing bore with a 7mm axial width.

How does it cope with shaft misalignment or eccentricity?


The elastomer lip and flexible rubber outer diameter permit some misalignment accommodation while the spring preserves sealing contact.

What rotational speed limits should be observed?


Maximum recommended rotational speed is 3,660 r/min to avoid exceeding the stated circumferential speed limit.

Can it be used where slight pressure differentials exist?


It tolerates a nominal pressure differential of 0.03 N/mm across the seal interface.

Are any complementary items suggested for installation?


A thin protective sleeve, such as a Speedi-Sleeve, may be used where shaft wear or grooves are present to aid correct seating.

Related links