SICK Female 5 way M12, Right Angle to Unterminated Sensor Actuator Cable, 5 m

View all Sensor & Actuator Cables

Subtotal (1 unit)*

Kr. 159,82

(exc. VAT)

Kr. 199,78

(inc. VAT)

Add to Basket
Select or type quantity
In Stock
  • 126 unit(s) ready to ship
  • Plus 4 unit(s) ready to ship from another location
  • Plus 60 unit(s) shipping from 15 April 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units
Per unit
1 +Kr. 159,82

*price indicative

RS Stock No.:
180-6359
Mfr. Part No.:
YG2A15-050VB5XLEAX
Brand:
SICK
Find similar products by selecting one or more attributes.
Select all

Brand

SICK

Series

YG2A15

Product Type

Sensor Actuator Cable

Jacket Material

Polyvinyl Chloride

Jacket Colour

Grey

Cable Length

5m

Connector Gender A

Female

Connector Type A

M12, Right Angle

Number of Contacts A

5

Connector Type B

Unterminated

Voltage

125 V

Standards/Approvals

CE, UL

IP Rating

IP65, IP66K, IP67

Sick YG2A15 Series Sensor Actuator Cable, 5m Length, Grey Jacket - YG2A15-050VB5XLEAX


This sensor actuator cable connects M12-equipped sensors to equipment via flying leads for direct wiring in industrial systems. It is intended for sensor and actuator signal transmission in harsh environments where mechanical and chemical exposure occurs, offering a robust grey PVC outer sheath and a five-core conductor arrangement for straightforward integration into automation, electrical and mechanical installations.

Features & Benefits


• Rated for ≤125V to support low-voltage control circuits
• Five conductors with 0.34mm² cross-section for reliable signal carrying
• Ingress protection IP65/IP66K/IP67 allowing washdown and outdoor use
• Operating range −5°C to +80°C flexible during movement
• Current rating 4A to handle typical sensor loads
• Unshielded design reduces stiffness for tight routing

Applications


• Suitable for wiring proximity sensors in factory automation
• Ideal for connecting valve actuators on process equipment
• Used for linking conveyors’ detection heads to control panels
• Can be used for retrofit sensor installations in machinery
• Suitable for installations requiring M12 female to unterminated connection

What connector types are provided at each end?


One end has a 5-pin A-coded M12 female connector with angled orientation and screw termination

the opposite end is unterminated flying leads for direct field wiring.

How should the connector be torqued during installation?


The recommended tightening torque for the locking nut is 0.6 Nm and an SW13 tool is suitable for assembly.

What mechanical properties affect bend routing?


The cable diameter is 5.2mm and the minimum bending radius is greater than 10x diameter for flexing and greater than 5x diameter when stationary.

Which materials are used in the connector to resist chemicals?


The connector housing is MADE from TPU, the locking nut is nickel-plated zinc die-cast and the seal uses FKM to enhance chemical resistance.

Related links