Login / Register to access your benefits
Recently searched

    Sheet Metal & Panel Fasteners

    Our advanced selection of sheet metal and panel fasteners includes many types of nuts, bushes, mandrels, stand-offs and studs, as well as multi-piece insert kits and more.

    These products are suitable for a broad range of metalworking, assembly and production tasks that involve thin sheet metal materials, such as general machinery building/assembly, tube bending, lathe work and mounting rails of equipment racks.

    What are the key differences between panel fastener types?

    • Cage nuts are typically used for mounting front panels to slide systems and instrument housings. A steel nut is held captive in a spring-steel cage for added grip/durability, and ideally used with a range of front panel screws.
    • Captive nuts work similarly to cage nuts; when compressed during insertion they secure, lock and hold the nut in the desired position.
    • Clinch nuts are most often used as permanent installations on thin sheet materials like aluminium. Once inserted into a properly sized hole, a parallel squeezing force is applied to the head of the self-clinching nut, causing a flow of material into specially designed grooves under the head for a load-bearing, torque-resistant joint. Along with self-clinching captive studs, they're often found as fasteners in white goods and various electrical assemblies and enclosures.
    • Self-clinching standoffs work similarly to rivet bushes, in that they're designed to allow greater loads to be affixed to relatively thin or weak materials. They're used to insert a load-bearing thread into a sheet of material, often in order to raise it above another piece (e.g. lifting a PCB away from a metal case to prevent shorting.
    • Through-threaded standoffs are fully drilled out, while the hole in a blind-threaded standoff is only cut to a partial depth for retaining smooth, closed outer panels when inserted flush with a surface.
    • Mandrels are a special type of shaft or bar fastener, designed to be inserted into holes in sheet metals in order to hold them securely in place during machining. They're sold in plain tempered steel varieties, as well as expanding versions (slightly tapered with an expandable wedge for holding your work), or straight threaded nut mandrels.
    Insert Kits
    Insert Kits
    Mandrels
    Mandrels
    Self-Clinching Captive Studs
    Self-Clinching Captive Studs
    Self-Clinching Standoffs
    Self-Clinching Standoffs
    Thread Repair Inserts
    Thread Repair Inserts
    Threaded Inserts
    Threaded Inserts

    318 Products showing for Sheet Metal & Panel Fasteners

    1 of 16
    RS PRO, M3 Brass Threaded Insert, 4.6mm diameter 4mm Depth 5.7mm
    • RS Stock No. 204-0616
    1 Bag of 100
    Kr. 193,56
    RS PRO, M4 Brass Threaded Insert, 6.3mm diameter 5.6mm Depth 8.2mm
    • RS Stock No. 204-0617
    1 Bag of 100
    Kr. 290,23
    RS PRO Thread Repair Insert, M8 x 1.25, Drill Size 8.3
    • RS Stock No. 175-0425
    Each (In a Pack of 20)
    Kr. 5,04
    RS PRO Plain, M6 Threaded Insert diameter 9mm
    • RS Stock No. 206-5522
    1 Bag of 100
    Kr. 92,66
    RS PRO, M3 Brass Threaded Insert, 5.5mm diameter 4mm Depth 5.7mm
    • RS Stock No. 204-0620
    1 Bag of 100
    Kr. 362,53
    AVK Plain, M4 Steel Threaded Insert, 9.91mm diameter 6.75mm Depth 7.75mm
    • RS Stock No. 667-9835
    • Mfr. Part No. AVKALS3T-470-3.3
    1 Bag of 100
    Kr. 341,08
    RS PRO, M4 Brass Threaded Insert, 7.1mm diameter 5.6mm Depth 8.2mm
    • RS Stock No. 204-0621
    1 Bag of 100
    Kr. 435,06
    Böllhoff Thread Repair Insert, M3 x 0.5, Drill Size 3.2mm
    • RS Stock No. 470-834
    • Mfr. Part No. 41890030006
    Each (In a Pack of 20)
    Kr. 3,166
    Bollhoff Plain, M8 Steel Insert 23307080230, 16mm
    • RS Stock No. 425-7569
    • Mfr. Part No. 23307080230
    1 Lot of 100
    Kr. 539,82
    RS PRO, M5 Brass Threaded Insert, 7.1mm diameter 6.4mm Depth 9.5mm
    • RS Stock No. 204-0618
    1 Bag of 100
    Kr. 494,89
    RS PRO Steel Zinc plated & clear Passivated Self Clinching Stud, M5, length-16mm
    • RS Stock No. 827-417
    1 Bag of 50
    Kr. 97,13
    RS PRO Plain, M4 Threaded Insert diameter 6mm
    • RS Stock No. 206-5492
    1 Bag of 100
    Kr. 81,00
    RS PRO Thread Repair Insert, M8 x 1.25, Drill Size 8.3
    • RS Stock No. 175-0418
    Each (In a Pack of 20)
    Kr. 4,084
    RS PRO Thread Repair Insert, M6 x 1, Drill Size 6.2
    • RS Stock No. 175-0424
    Each (In a Pack of 20)
    Kr. 4,084
    RS PRO Thread Repair Insert, M6 x 1mm, Drill Size 6.2
    • RS Stock No. 175-0431
    Each (In a Pack of 20)
    Kr. 5,04
    RS PRO, M6 Brass Threaded Insert, 8.7mm diameter 8mm Depth 12.7mm
    • RS Stock No. 204-0619
    1 Bag of 100
    Kr. 771,74
    RS PRO Plain, M5 Threaded Insert diameter 7mm
    • RS Stock No. 206-5520
    1 Bag of 100
    Kr. 87,40
    Recoil Thread Repair Insert, M4 x 0.7, Drill Size 4.2mm
    • RS Stock No. 291-896
    • Mfr. Part No. 25043
    1 Bag of 10
    Kr. 91,77
    RS PRO Thread Repair Insert, M10 x 1.5, Drill Size 10.3
    • RS Stock No. 175-0426
    Each (In a Pack of 10)
    Kr. 6,04
    RS PRO, M3 Brass Threaded Insert diameter 4mm Depth 4.78mm
    • RS Stock No. 278-584
    1 Bag of 100
    Kr. 408,06
    Results per page
    1
    2
    3
    16

    Related links