Ceiling Lights

A ceiling light is an electrical fitting containing a lamp or light bulb to provide an artificial light source in a room. Ensuring a workplace has adequate illumination is essential for employee health and safety. Substandard or insufficient lighting can lead to various complaints including eye-strain, headaches and fatigue. On the opposite end of the scale, too much light can also cause the same problems. Both can result in quality issues, low productivity and sometimes accidents can occur.

What ceiling light is best for me?

There are various types of ceiling fixture available, choosing the best one for an installation depends on a few key factors.

  • Natural light: Make the best use of existing natural light. Ensure that all windows and skylights are kept clean to allow as much natural light is utilised.
  • Application: Make sure that the correct type of ceiling lighting is installed for the job at hand. An office environment requires different lighting to a clothing factory containing sewing machines and fabric matching tables.
  • Positioning: Care must be taken when installing ceiling lighting. The correct positioning of lighting ensures that employees can safely carry out their daily tasks and not put themselves under any unnecessary strains.
  • Environment: Must ceiling light be Anti-corrosive or IP44 rated or above.

Whether you are installing office lighting, garage lighting, LED or fluorescent, industrial ceiling lights are the most likely. Some additional points to consider are;

Mounting type

  • Recessed or flush ceiling light: Enables the lamp to be mounted flush into the ceiling.
  • Surface mount: A simple way of fixing single or twin batten fluorescent or LED fixtures to the ceiling.
  • Pendant: A type of fitting that suspends the lamp a short distance from the ceiling.
  • Dimmable: Must the lighting be dimmable? If so extra ballasts and switching components must be used.
  • Diffusers: Used to spread and soften the light.

Colour Temperature

Colour temperature refers to a scale that measures the type of colour or hue that a lamp emits. The colour temperature scale is measured in Kelvins (K). The higher the K number the cooler the lamp. The lower the K number the warmer the lamp.

  • 2500K Extra warm white.
  • 2700K Warm white.
  • 3000K Warm white / White.
  • 3500K White.
  • 4000K Cool white.
  • 6500K Daylight.

...
Read more Read less

Filters

Viewing 21 - 40 of 243 products
Results per page
Description Price Type Length Width Depth Wattage Number of Lamps Colour Tone Lamp Type Colour Temperature Lamp Size Life Hours Colour Reference Voltage Rating Anti-corrosive
RS Stock No. 612-1030
Mfr. Part No.JUB2235J
kr 2 149,80
Each
Units
Single Batten 1.5 m - 78 mm 35 W 2 - Fluorescent - T5 - - 230 V ac -
RS Stock No. 122-7975
Mfr. Part No.910500453338
kr 1 123,03
Each
Units
Single Batten 1.223 m 87 mm 96 mm 35.5 W 1 Cool White LED 4000K - - - 240 V -
RS Stock No. 918-1114
BrandRS PRO
kr 873,24
Each
Units
Batten 1.527 m 61 mm 64 mm 40 W 1 Cool White LED 4000K T8 - - - No
RS Stock No. 851-3052
BrandRS PRO
kr 136,875
Each (In a Pack of 2)
Units
Diffuser 1219 mm - - - 1 - Fluorescent - T5 - - - No
RS Stock No. 125-0610
Mfr. Part No.45176
BrandSylvania
kr 578,91
Each
Units
Single Batten 605 mm 66 mm 76 mm 11 W 1 Warm White Integrated LED 3000K T8 - - 240 V -
RS Stock No. 796-1858
BrandRS PRO
kr 2 248,51
Each
Units
Single Batten 1.557 m 55 mm 87 mm 35 W 1 - Fluorescent - T5 - - 220 → 240 V No
RS Stock No. 125-0612
Mfr. Part No.45178
BrandSylvania
kr 1 100,00
Each
Units
Single Batten 1.205 m 66 mm 76 mm 26 W 1 Warm White Integrated LED 3000K T8 - - 240 V -
RS Stock No. 918-1111
BrandRS PRO
kr 986,90
Each
Units
Batten 1.791 m 61 mm 64 mm 50 W 1 Cool White LED 4000K T8 - - - No
RS Stock No. 125-0607
Mfr. Part No.45173
BrandSylvania
kr 1 273,77
Each
Units
Single Batten 1.205 m 66 mm 76 mm 53 W 1 Cool White Integrated LED 4000K T8 - - 240 V -
RS Stock No. 918-1120
BrandRS PRO
kr 1 456,19
Each
Units
Batten 1.791 m 61 mm 64 mm 75 W 1 Cool White LED 4000K T12 - - - No
RS Stock No. 918-1133
BrandRS PRO
kr 2 285,63
Each
Units
Single Batten 1.537 m 87 mm 213 mm 55 W 1 Daylight LED 5000K T8 - - - No
RS Stock No. 125-0625
Mfr. Part No.45216
BrandSylvania
kr 1 296,80
Each
Units
Single Batten 1.205 m 66 mm 76 mm 26 W 1 Cool White Integrated LED 4000K T8 - - 240 V -
RS Stock No. 851-3018
BrandRS PRO
kr 275,17
Each
Units
Single Batten 1.475 m 63 mm - 35 W 1 - Fluorescent - T5 - - 230 V No
RS Stock No. 851-3021
BrandRS PRO
kr 297,25
Each
Units
Single Batten 1.475 m 63 mm - 49 W 1 - Fluorescent - T5 - - 230 V No
RS Stock No. 176-8551
BrandRS PRO
kr 496,76
Each
Units
LED Luminaire 1.5 m 94 mm - 40 W 1 Daylight LED 6300K - - 70 100 → 277 V ac -
RS Stock No. 174-4965
Mfr. Part No.45163
BrandSylvania
kr 505,31
Each
Units
Batten 1.2 m 82 mm 48 mm 30 W 2 - LED 4000K T8 25000h - 220 → 240 V -
New
RS Stock No. 195-0210
Mfr. Part No.4058075204041
BrandLEDVANCE
kr 1 451,52
Each
Units
- 1.5 m 95 mm 78 mm 55 W 1 Cool White Integrated LED 4000K - 50000h - 220 → 240 V -
New
RS Stock No. 190-8289
Mfr. Part No.4058075225336
BrandLEDVANCE
kr 1 023,84
Each
Units
Panel Light 620 mm 620 mm 9 mm 40 W - Cool White Fluorescent 4000K - 80000h - 220 → 240 V -
New
RS Stock No. 194-5844
Mfr. Part No.4058075210127
BrandLEDVANCE
kr 1 126,61
Each
Units
- 1.59 m 86 mm 68 mm 55 W 1 Cool Daylight Integrated LED 6500K - 50000h - 220 → 240 V -
RS Stock No. 174-4961
Mfr. Part No.45159
BrandSylvania
kr 259,07
Each
Units
Batten 1.2 m 42.5 mm 47.5 mm 16 W 1 - LED 4000K T8 25000h - 220 → 240 V -
Related Products
230V IP65 1x36W 4ft Single High Frequency Non-Corrosive ...
Description:
230V IP65 1x36W 4ft Single High Frequency Non-Corrosive Fluorescent Fitting with Emergency. Brackets for surface mounting3 hour Emergency. Supplied with 10 x fixing clips. Polycarbonate base and diffuser. Push-fit terminals. Compatible with 1x36W 4ft T8 lamp (not supplied).
230V IP65 1x58W 5ft Single High Frequency Non-Corrosive ...
Description:
230V IP65 1x58W 5ft Single High Frequency Non-Corrosive Fluorescent Fitting with Emergency. Brackets for surface mounting3 hour emergency. Supplied with 12 x fixing clips. Polycarbonate base and diffuser. Push-fit terminals. Compatible with 1x58W 5ft T8 lamp (not supplied).
230V IP65 2x18W 2ft Twin High Frequency Non-Corrosive ...
Description:
230V IP65 2x18W 2ft Twin High Frequency Non-Corrosive Fluorescent Fitting. Brackets for surface mounting. Supplied with 6 x fixing clips. Polycarbonate base and diffuser. Push-fit terminals. Compatible with 2x18W 2ft T8 lamp (not supplied).
230V IP65 2x58W 5ft Twin High Frequency Non-Corrosive ...
Description:
230V IP65 2x58W 5ft Twin High Frequency Non-Corrosive Fluorescent Fitting. Brackets for surface mounting. Supplied with 12 x fixing clips. Polycarbonate base and diffuser. Push-fit terminals. Compatible with 2x58W 5ft T8 lamp (not supplied).