Brass & Copper Push Fit Fittings

Copper Pipe Fittings
Copper is used as it can tolerate very high temperatures and as such, is used widely for central heating applications

Different types of Fittings

Adapters
Adapters are used to extend runs, or to simply change the connection type at the end of a pipe

Bushings
Bushings are used to join pipes of different sizes, usually by reducing a larger fitting down to a smaller pipe.

Couplings
A coupling is used to extend the run of a pipe, or change pipe sizes

Elbows
If you need to change the direction of flow, elbows are likely your best bet. Produced primarily in 90 and 45 degree angles (unique sizes like 22.5 and 60 are also available), elbows can be threaded or sweated, and are one of the most crucial fittings used in plumbing

Tees
When more than one branch is required of a water supply, tees are the way to go. Essentially a long coupling with an outlet on the side, these fittings feature their outlets at 90° from the inlet, and are sized according to their "run" (the horizontal, or straight-through dimension of the fitting), and the side outlet (the "top" of the fitting, 90 degrees off the run). When the run of a tee is smaller than the side outlet, it's often referred to as a "bull head" fitting.

Caps and Plugs
A cap, as its name suggests, is a cap that goes over the end of a pipe, creating a dead end. Plugs also stop up a pipe or tube system, but are plugged, like a stopper, into the end of the pipe.

Cross type Fitting
Cross type fittings contains 4 opening in 4 directions. These are connected when there are 4 pipes are meeting at a point.

...
Read more Read less

Filters

Viewing 1 - 20 of 31 products
Results per page
Description Price Fitting Direction Fitting Type Material Push Fit Pipe Size Threaded Connection Threaded Tee Connection Demountable Connection Gender Tee Gender Thread Size Thread Size Tee Thread Standard Thread Standard Tee
RS Stock No. 340-6760
Mfr. Part No.MM051504N
kr 64,88
Each (In a Pack of 3)
Units
Straight Stem Adapter Brass 15mm 1/2 in R Male - - - Male 1/2in - R -
RS Stock No. 712-6764
Mfr. Part No.65840
kr 165,00
Each
Units
- Branch Tee Brass 15mm - 1/2 in G Female Yes Female - - 1/2in - G
RS Stock No. 199-2360
Mfr. Part No.15MC(1/2)BRASS
BrandJohn Guest
kr 74,86
Each
Units
Straight Coupler Brass 15mm 1/2 in BSP Male - Yes - Male 1/2in - BSP -
RS Stock No. 712-6768
Mfr. Part No.65874
kr 68,36
Each
Units
- End Stop Brass 22mm - - Yes - - - - - -
RS Stock No. 712-6783
Mfr. Part No.65820
kr 119,22
Each
Units
- One End & Branch Reducer Tee Brass 22 x 15mm - - Yes - - - - - -
RS Stock No. 712-6746
Mfr. Part No.65121
kr 81,38
Each
Units
Straight Coupler Brass 22mm - - Yes - - - - - -
RS Stock No. 712-6749
Mfr. Part No.65206
kr 100,91
Each
Units
Straight Coupler Brass 15mm 1/2 in G Female - Yes - Female 1/2in - G -
New
RS Stock No. 200-6944
Mfr. Part No.C6RG2-35
kr 43,907
Each (In a Box of 6)
Units
Straight Tap Connector Bronze - - - - - - - - - -
RS Stock No. 199-2376
Mfr. Part No.22MC(3/4)BRASS
BrandJohn Guest
kr 138,15
Each
Units
Straight Coupler Brass 22mm 3/4 in BSP Male - Yes - Male 3/4in - BSP -
RS Stock No. 712-6770
Mfr. Part No.65676
kr 134,28
Each
Units
- Equal Tee Brass 22mm - - Yes - - - - - -
New
RS Stock No. 200-6924
Mfr. Part No.BT11
kr 84,022
Each (In a Box of 10)
Units
Straight Tap Connector Brass - - - - - - - - - -
RS Stock No. 712-6777
Mfr. Part No.65292
kr 155,03
Each
Units
Straight Taper Coupler Brass 22mm 3/4 in R Male - Yes - Male 3/4in - R -
New
RS Stock No. 200-6946
Mfr. Part No.C5-1BR921
kr 45,326
Each (In a Box of 5)
Units
Straight Tap Connector Brass - - - - - - - - - -
RS Stock No. 712-6724
Mfr. Part No.65666
kr 85,65
Each
Units
- Equal Tee Brass 15mm - - Yes - - - - - -
RS Stock No. 840-5696
Mfr. Part No.SB0154E
BrandSharkbite
kr 606,55
Each
Units
Straight Coupler Brass 54mm - - Yes - Female - - - -
RS Stock No. 468-6197
Mfr. Part No.15HSV
BrandJohn Guest
kr 182,29
Each
Units
- Service Valve Brass 15mm - - Yes - - 1/2in - BSP -
RS Stock No. 712-6727
Mfr. Part No.65114
kr 49,44
Each (In a Pack of 2)
Units
Straight Coupler Brass 15mm - - Yes - - - - - -
RS Stock No. 340-6776
Mfr. Part No.MM052206N
kr 99,323
Each (In a Pack of 3)
Units
Straight Stem Adapter Brass 22mm 3/4 in R Male - - - Male 3/4in - R -
RS Stock No. 468-6210
Mfr. Part No.15SVSTC
BrandJohn Guest
kr 166,87
Each
Units
- Service Valve Brass 15mm - - Yes - - 1/2in - BSP -
New
RS Stock No. 200-6923
Mfr. Part No.SE2-50S
kr 75,822
Each (In a Box of 10)
Units
Straight Tap Connector Bronze - - - - - - - - - -
Related Products
Enhanced performance demountable DZR brass fittings. Features a ...
Description:
Enhanced performance demountable DZR brass fittings. Features a stainless steel grab ring. Suitable for use with copper or plastic tube. For use in the mechanical services sector on hot and cold water applications. Provides electrical continuity.
High quality Water Research Council (WRC) approved copper ...
Description:
High quality Water Research Council (WRC) approved copper solder ring capillary fittings.,Suitable for connecting copper tubes in accordance with BS2871 Part 1 and ISO 274. These potable solder ring fittings are manufactured in accordance with BS864 Part 2 and are ...
High quality Water Research Council (WRC) approved copper ...
Description:
High quality Water Research Council (WRC) approved copper solder ring capillary fittings.,Suitable for connecting copper tubes in accordance with BS2871 Part 1 and ISO 274. These potable solder ring fittings are manufactured in accordance with BS864 Part 2 and are ...
High Quality Water Research Advisory Scheme (WRAS) approved ...
Description:
High Quality Water Research Advisory Scheme (WRAS) approved type A brass compression fittings and accessories. Suitable for connecting copper tubes in accordance with BS2871 part 1These fittings are also suitable for connecting low carbon steel tube, stainless steel tube and ...