Bonded Bearings

Bonded bearings are anti-vibration bushes designed to provide protection from shock and vibration. They are often designed to avoid wear and remove the need for lubrication, ensuring low maintenance requirements.

How do bonded bearings work?

Bonded bearings work by eliminating high frequencies while supporting high loads during operation. They typically consist of two concentric sleeves with rubber bonded between them. The rubber is usually pre-stressed to give dynamic strength and maximum durability. They are designed to provide noise and vibration isolation, accommodate misalignment and protect from shock loads.

Types and uses of bonded bearings

Bonded bearings come in two main types: fully bonded and semi-bonded variants. Fully bonded bearings are made with rubber bonded to the inner and outer metal tubes. Semi-bonded types are usually manufactured with the rubber bonded to the inner tube and attached to the outer.

Bonded bearings are used in various applications including:

  • Motor vehicles
  • Flexible joints
  • Earth-moving machinery
  • Railway carriages
  • Tractors and other agricultural machinery
  • Vibratory screens
  • Bulldozers
  • Generators
  • Vehicle suspension

...
Read more Read less

Filters

Viewing 1 - 18 of 18 products
Results per page
Description Price Inside Diameter Outside Diameter Overall Length Outer Bush Length
RS Stock No. 189-3195
BrandRS PRO
kr 46,385
Each (In a Pack of 4)
Units
12mm 28mm 32mm 38mm
RS Stock No. 189-3201
BrandRS PRO
kr 49,358
Each (In a Pack of 4)
Units
10mm 30mm 45mm 49mm
RS Stock No. 189-3194
BrandRS PRO
kr 46,385
Each (In a Pack of 4)
Units
12mm 26mm 20mm 24mm
RS Stock No. 189-3200
BrandRS PRO
kr 53,798
Each (In a Pack of 4)
Units
12mm 32mm 34mm 40mm
RS Stock No. 189-3192
BrandRS PRO
kr 46,385
Each (In a Pack of 4)
Units
10mm 22mm 20mm 23mm
RS Stock No. 189-3193
BrandRS PRO
kr 57,533
Each (In a Pack of 4)
Units
20mm 44mm 38mm 42mm
RS Stock No. 189-3196
BrandRS PRO
kr 46,385
Each (In a Pack of 4)
Units
8.2mm 20mm 14mm 21mm
RS Stock No. 189-3197
BrandRS PRO
kr 51,96
Each (In a Pack of 4)
Units
16mm 32mm 25mm 28mm
RS Stock No. 301-1407
Mfr. Part No.FBNS1232.3440
BrandFIBET
kr 36,23
Each (In a Pack of 4)
Units
12mm 32mm 40mm 34mm
RS Stock No. 298-2904
Mfr. Part No.FBNS1226.2024
BrandFIBET
kr 32,92
Each (In a Pack of 4)
Units
12mm 26mm 24mm 20mm
RS Stock No. 301-1362
Mfr. Part No.FBNS1030.4549
BrandFIBET
kr 27,193
Each (In a Pack of 4)
Units
10mm 30mm 49mm 45mm
RS Stock No. 301-1435
Mfr. Part No.FBNS1632.2528
BrandFIBET
kr 57,668
Each (In a Pack of 4)
Units
16mm 32mm 28mm 25mm
RS Stock No. 298-2897
Mfr. Part No.FBNS1022.2023
BrandFIBET
kr 37,013
Each (In a Pack of 4)
Units
10mm 22mm 23mm 20mm
RS Stock No. 301-1441
Mfr. Part No.FBNS1834.3236
BrandFIBET
kr 42,82
Each (In a Pack of 4)
Units
18mm 34mm 36mm 32mm
RS Stock No. 301-1479
Mfr. Part No.FBNS2044.3842
BrandFIBET
kr 63,423
Each (In a Pack of 4)
Units
20mm 44mm 42mm 38mm
RS Stock No. 298-2881
Mfr. Part No.FBNS0820.1421NR
BrandFIBET
kr 30,21
Each (In a Pack of 4)
Units
8.2mm 20mm 21mm 14mm
RS Stock No. 298-2926
Mfr. Part No.FBNS1228.3238
BrandFIBET
kr 32,945
Each (In a Pack of 4)
Units
12mm 28mm 38mm 32mm
RS Stock No. 301-1384
Mfr. Part No.FBNS1230.3444
BrandFIBET
kr 40,765
Each (In a Pack of 4)
Units
12mm 30mm 44mm 34mm
Related Products
igus® iglidur® M250 bearings are rugged, wear-resistant, offer ...
Description:
igus® iglidur® M250 bearings are rugged, wear-resistant, offer good vibration-dampening properties, and are able to balance edge loads well. iglidur® M250 bearings also help to minimise noise in low speed system, and are not sensitive to misalignment. Split plain bearing ...