Development Kits

A development kit is a collective term referring to accessories related to the installation, evaluation, generation and add-on components of switch technologies. 


What are development kits used for?

Your choice of development kit depends on the type of switch technology required. Pairing the right development kit with the corresponding switch system is essential to get the most benefit from it. Common switch technology categories include dimmers, toggles, rockers, pressure and reed switches. You can also get development kits for micro-switches. 


Typical applications include industrial and building automation, smart technologies and medical devices.


Types of development kits

Three broad ranges of kits are available, each with a different purpose.

  • Evaluation kits allow for testing of energy harvesting technologies. They also measure specific parameters, for example signal strength and range.
  • Generation kits convert mechanical energy into electrical energy for data transfer in snap and rocker switches. This eliminates the need for batteries.
  • Add-on kits consist of adaptors like receiver modules and connectors for wall mounting capabilities. Flexible pairing enables several receivers to operate via one switch and vice versa, increasing usage flexibility. 

Read more Read less


Viewing 1 - 6 of 6 products
Results per page
Description Price Accessory Type For Use With
RS Stock No. 878-0319
Mfr. Part No.T201-DEV1
kr 3 179,55
Multi-Touch Control Wheel Development Kit Clean Room Controls, Medical Device, Off-Highway Vehicles
RS Stock No. 789-7208
Mfr. Part No.AFIK-1002
kr 3 745,83
1 Box of 1
Evaluation Kit Wireless Switch Applications
RS Stock No. 873-6678
Mfr. Part No.AFIG-0007
kr 113,16
RF Generator Energy Harvesting Switch
RS Stock No. 873-6684
Mfr. Part No.AFZE-1003
kr 1 054,93
Receiver Board Energy Harvesting Wireless Switch
RS Stock No. 894-8981
Mfr. Part No.AFIM-1001
kr 317,25
Wireless Switch Generator Wireless Snap and Rocker Switches
RS Stock No. 873-6687
Mfr. Part No.AFZE-1005
kr 217,55
Receiver Module with Wire Antenna 868 MHz Cherry Energy Harvesting Switches
Related Products
Low Input Offset Voltage: 250 μV (maximum)Rail-to-Rail Output. ...
Low Input Offset Voltage: 250 μV (maximum)Rail-to-Rail Output. Low Input Bias Current: 80 pA (maximum at +85°C)Low Quiescent Current: 25 μA (maximum)Power Supply Voltage: 2.5V to 6.0VUnity-Gain Stable. Chip Select (CS) Capability: MCP608Industrial Temperature Range: -40°C to +85°CNo Phase Reversal. ...
Desktop and Notebook PCsLCD Monitors. Consumer Electronics. AppliancesSix ...
Desktop and Notebook PCsLCD Monitors. Consumer Electronics. AppliancesSix (6) Capacitive Touch Sensor Inputs. Programmable sensitivity. Automatic recalibration Individual thresholds for each button. Proximity Detection. Multiple Button Pattern Detection. Calibrates for Parasitic Capacitanceanalogue Filtering for ...
Super thin ChipLED with exceptional brightness 1.6 mm ...
Super thin ChipLED with exceptional brightness 1.6 mm x 0.8 mm x 0.55 mm (L x W x H)High reliability PCB based. Wavelength typ. 525 nm (true green)In. GaN technology. Viewing angle: extremely wide 146°Grouping parameter: luminous intensity dominant wavelength, ...
Position Sensorless BLDC Drivers (no Hall Sensor required)180° ...
Position Sensorless BLDC Drivers (no Hall Sensor required)180° Sinusoidal Drive for High Efficiency and Low Acoustic Noise. Supports 2V to 14V Power Supplies. Speed Control through Power Supply Modulation (PSM) and/or Pulse-Width Modulation (PWM)Built-In Frequency Generator (FG output signal)Built-In Lock-Up ...