Multimeter Test Leads

Multimeter test leads are considered to be an integral part of electrical measurement, for example connecting your digital multimeter to the unit under test. If the test leads are in poor condition this can lead to inaccurate readings and could result in a health and safety concern if live wires are being read as being de-energised.

A lead kit for measuring high voltage and high energy circuits, such as distribution system voltages (240V- 600V), needs to be in good condition with the proper markings and ratings. You should always take precautionary steps to verify the condition and rating of the leads before testing to ensure safety in the workplace.

There are test lead sets designed to meet the requirements of nearly all applications.

Checks before you start:

  • Confirm that the multimeter and multimeter test leads are rated for the category and voltage level appropriate for the electrical environment they will be used in. Electrical measurement category ratings are defined by the safety standard, IEC61010 and have four ratings, CAT I, CAT II, CAT III and CAT IV.
  • Inspect the leads to make sure they are safe to use and able to conduct electrical signals accurately. This includes checking that the leads are properly insulated with no cracks through the cables and also checking the connectors are clean and debris-free.
  • Complete a visual inspection first then conduct simple ohms measurement to confirm they are electrically reliable and able to carry a signal within allowable loss parameters.

  • ...
    Read more Read less

    Filters

    Viewing 161 - 164 of 164 products
    Results per page
    Description Price Lead Type Product Type Connector Type Fused Lead Length Current Rating Safety Category Voltage Safety Category Minimum Operating Temperature Maximum Operating Temperature Calibrated Safety Category Level
    RS Stock No. 179-9409
    Mfr. Part No.BU-PB36-2
    kr 65,58
    Each
    Units
    Test Lead - 4 mm Banana Plug - 0.9m 15A 1000V - - - - -
    RS Stock No. 827-0187
    Mfr. Part No.KML 7528 / 2ZA / 4x0.22 / 70
    kr 2 454,81
    Each
    Units
    Shrouded Plug - Stackable Plug with 2 Pincer - 700mm 1A - - - - - -
    RS Stock No. 179-9408
    Mfr. Part No.BU-PB36-0
    kr 65,58
    Each
    Units
    Test Lead - 4 mm Banana Plug - 0.9m 15A 1000V - - - - -
    RS Stock No. 122-5533
    Mfr. Part No.MP30-08
    BrandMartindale
    kr 588,23
    Each
    Units
    Test Lead Kit - Plug Yes 1.2m 500mA 1000V CAT IV 1000 V - - - CAT IV
    Related Products
    Safety: CAT II 600 V or CAT III ...
    Description:
    Safety: CAT II 600 V or CAT III 300 V. Pen multimeter for one-handed operation. Ideal for measurement work in cramped spaces3400 digit visual display. Automatic range selection. Display lock (data hold function)Continuity test with beeper. Automatic power off.
    A pocket sized meter with the following features:. ...
    Description:
    A pocket sized meter with the following features:. Clear 3200 count LCD display, incorporating legends to indicate function selected5 functions/16 ranges. Autoranging on volts and resistance ranges up to 450V ac or dc and 32MΩData hold. Continuity test bleeper. Diode ...
    The Fluke t3000 FC Kit includes multimeter, temperature ...
    Description:
    The Fluke t3000 FC Kit includes multimeter, temperature module and accessories. AC and DC voltage measurements to 1000V AC and DC current with 0.01 mA resolution Continuity, resistance, diode test, capacitance and frequency measurements MIN/MAX recording CAT III 1000 V, ...
    The Fluke 3000 FC General Maintenance System lets ...
    Description:
    The Fluke 3000 FC General Maintenance System lets you work on electrical panels faster, safer, easier. Connect the remote modules, view readings from a distance. The Fluke 3000 FC General Maintenance System includes multimeter, i. Flex clamp module, ac voltage ...