Cypress Semiconductor CYBLE-012011-00 Bluetooth Chip 4.1

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

CYBLE-01201x-x0 EZ-BLE Bluetooth Module

The CYBLE-01201x-x0 module contains all the necessary components to add low-power Bluetooth BLE wireless connectivity to a project design. It includes a royalty-free BLE stack compatible with the Bluetooth 4.1 standard. Two versions are available: one fully qualified and certified and an uncertified module without a screening can for initial lab development only. PSoC Creator™ provides an integrated design environment (IDE) to configure, develop, program and test a BLE application.

CYBL10 48MHz Cortex-M0 core PRoC with 128KB Flash memory, 16KB RAM
RF Frequency Range: 2400 to 2482MHz ISM band
RF Power Output: up to +3dBm
Receiver Sensitivity: -87dBm
OTA Data Rate: 1Mbps
Up to 23 x GPIO
Up to 22 x capacitive sensors for buttons or sliders with liquid tolerance
8-channel 12-bit, 1Msps ADC with internal reference, sample-and-hold (S/H) and channel sequencer
2 x serial communication blocks (SCB) supporting I²C (master/slave), SPI (master/slave), or UART
LCD drive supported on all GPIOs (common or segment)
Programmable low voltage detect (LVD) from +1.8 to +4.5Vdc
I²S master interface
PCB antenna
BLE protocol stack supporting generic access profile (GAP) Central, Peripheral, Observer and Broadcaster roles
Switches between Central and Peripheral roles on-the-go
Standard BLE profiles and services
Power modes: Active, Sleep, Deep Sleep, Hibernate and Stop
Power supply +1.8V to +5.5Vdc
Operating temperature range: -40 to +85°C
Dimensions: 14.52 x 19.20mm, SMT format
Applications: Short range communication for the Internet of Things (IoT)

RS Product Codes
124-4406 CYBLE-012011-00 PRoC EZ-BLE Radio Module, fully certified
124-4407 CYBLE-012012-10 PRoC EZ-BLE Radio Module, uncertified

Note

An evaluation board is available under RS Part No. 124-4197.

Approvals

CE, FCC, IC, MIC, KC (CYBLE-012011-00 only)

Specifications
Attribute Value
Bluetooth Version 4.1
Maximum Output Power +3dBm
Receiver Sensitivity -87dBm
Supported Bus Interfaces I2C, SPI, UART
Supported I/O Interfaces Serial
Dimensions 14.52 x 19.2 x 2mm
Height 2mm
Length 14.52mm
Maximum Operating Temperature +85°C
Minimum Operating Temperature -40°C
Width 19.2mm
47 In stock for delivery within 1 working days
Price Each
kr 80,86
(exc. VAT)
kr 101,08
(inc. VAT)
Units
Per unit
1 +
kr 80,86
Packaging Options:
Related Products
The SPBT2632C1A.AT2 is an easy and ready-to-use Bluetooth ...
Description:
The SPBT2632C1A.AT2 is an easy and ready-to-use Bluetooth V3.0 module to enable wireless connectivity. The complete RF module supports transmission speeds up to 560 kbps in SPP service, and 250 kbps in iAP service with AT2 command set. It has ...
The Blue Gecko BGM111 Bluetooth Smart module integrates ...
Description:
The Blue Gecko BGM111 Bluetooth Smart module integrates a Bluetooth 2.4GHz RF transceiver, 32-bit ARM Cortex microcontroller and a Bluetooth Smart (BLE) software stack. The on-board microcontroller allows it to operate standalone without an external processor. Bluetooth 4.1 compliant SoC, ...
The CYBT-423028-02 is a dual-mode Bluetooth BR/EDR and ...
Description:
The CYBT-423028-02 is a dual-mode Bluetooth BR/EDR and Low Energy (BLE) wireless module solution. The CYBT-423028-02 includes onboard crystal oscillators, passive components, and the Cypress CYW20719 silicon device. The CYBT-423028-02 supports a number of peripheral functions (ADC, PWM), as well ...
The CYBT-413034-02 is a dual-mode Bluetooth BR/EDR and ...
Description:
The CYBT-413034-02 is a dual-mode Bluetooth BR/EDR and Low Energy (BLE) wireless module solution. The CYBT-413034-02includes onboard crystal oscillators, passive components, and the Cypress CYW20719 silicon device.The CYBT-413034-02 supports a number of peripheral functions (ADC, PWM), as well as multiple ...