Cypress Semiconductor, CYBLE-012011-00

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

CYBLE-01201x-x0 EZ-BLE Bluetooth Module

The CYBLE-01201x-x0 module contains all the necessary components to add low-power Bluetooth BLE wireless connectivity to a project design. It includes a royalty-free BLE stack compatible with the Bluetooth 4.1 standard. Two versions are available: one fully qualified and certified and an uncertified module without a screening can for initial lab development only. PSoC Creator™ provides an integrated design environment (IDE) to configure, develop, program and test a BLE application.

CYBL10 48MHz Cortex-M0 core PRoC with 128KB Flash memory, 16KB RAM
RF Frequency Range: 2400 to 2482MHz ISM band
RF Power Output: up to +3dBm
Receiver Sensitivity: -87dBm
OTA Data Rate: 1Mbps
Up to 23 x GPIO
Up to 22 x capacitive sensors for buttons or sliders with liquid tolerance
8-channel 12-bit, 1Msps ADC with internal reference, sample-and-hold (S/H) and channel sequencer
2 x serial communication blocks (SCB) supporting I²C (master/slave), SPI (master/slave), or UART
LCD drive supported on all GPIOs (common or segment)
Programmable low voltage detect (LVD) from +1.8 to +4.5Vdc
I²S master interface
PCB antenna
BLE protocol stack supporting generic access profile (GAP) Central, Peripheral, Observer and Broadcaster roles
Switches between Central and Peripheral roles on-the-go
Standard BLE profiles and services
Power modes: Active, Sleep, Deep Sleep, Hibernate and Stop
Power supply +1.8V to +5.5Vdc
Operating temperature range: -40 to +85°C
Dimensions: 14.52 x 19.20mm, SMT format
Applications: Short range communication for the Internet of Things (IoT)

RS Product Codes
124-4406 CYBLE-012011-00 PRoC EZ-BLE Radio Module, fully certified
124-4407 CYBLE-012012-10 PRoC EZ-BLE Radio Module, uncertified

Note

An evaluation board is available under RS Part No. 124-4197.

Approvals

CE, FCC, IC, MIC, KC (CYBLE-012011-00 only)

Specifications
Attribute Value
Bluetooth Version 4.1
Maximum Output Power +3dBm
Receiver Sensitivity -87dBm
Supported Bus Interfaces I2C, SPI, UART
Supported I/O Interfaces I2C, SPI, UART
Dimensions 14.52 x 19.2 x 2mm
Height 2mm
Length 14.52mm
Maximum Operating Temperature +85°C
Minimum Operating Temperature -40°C
Width 19.2mm
Available to back order for despatch 01.09.2020
Price Each (On a Reel of 1000)
kr 56,613
(exc. VAT)
kr 70,766
(inc. VAT)
Units
Per unit
Per Reel*
1000 +
kr 56,613
kr 56 613,00
*price indicative
Related Products
The Silicon Labs Blue Gecko EFR32BGxxx32Fx So. Cs ...
Description:
The Silicon Labs Blue Gecko EFR32BGxxx32Fx So. Cs feature a 32-bit ARM Cortex-M4 processor core with a highly integrated radio transceiver supporting the Bluetooth Smart 2.4GHz wireless protocol. The devices are ideal for any battery operated application and other systems ...
The RN4870 module is based on the IS187x ...
Description:
The RN4870 module is based on the IS187x Bluetooth device and provides a complete solution to implement Bluetooth 4.2 Low Energy connectivity. The module is interfaced to a host MCU via a UART serial port using Microchip’s ASCII command set ...
Bluetooth system solutions enabling integrated Bluetooth connection for ...
Description:
Bluetooth system solutions enabling integrated Bluetooth connection for your product. These modules utilise the simple AT command set for ease of design via the UART or USB peripheral interface. Supported Profiles: RFCOMM, SPP device A and BComplete Bluetooth 3.0 + ...
The PAN1316/1326 series from Panasonic are Host Controlled ...
Description:
The PAN1316/1326 series from Panasonic are Host Controlled Interface (HCI) Dual Mode Bluetooth modules with Enhanced Data Rate (EDR) featuring both Bluetooth Low Energy and Bluetooth Classic connectivity. These modules contain the seventh generation CC2564 Bluetooth core integrated circuit from ...