Nexperia 74HCT373D,652 D Type Latch, 8-Bit Non-Inverting, 20-Pin SO
- RS Stock No.:
- 170-8071
- Mfr. Part No.:
- 74HCT373D,652
- Brand:
- Nexperia
Stock information currently inaccessible
- RS Stock No.:
- 170-8071
- Mfr. Part No.:
- 74HCT373D,652
- Brand:
- Nexperia
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Nexperia | |
| Logic Family | 74HCT | |
| Product Type | D Type Latch | |
| Logic Function | D Type | |
| Number of Channels | 8 | |
| Polarity | Non-Inverting | |
| Mount Type | Surface | |
| Package Type | SO | |
| Pin Count | 20 | |
| Minimum Supply Voltage | 4.5V | |
| Input Level | TTL | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Propagation Delay Time @ CL | 45ns | |
| Maximum Operating Temperature | 125°C | |
| Length | 13mm | |
| Standards/Approvals | No | |
| Series | 74HCT | |
| Height | 2.45mm | |
| Output Type | 3 State | |
| Automotive Standard | No | |
| Select all | ||
|---|---|---|
Brand Nexperia | ||
Logic Family 74HCT | ||
Product Type D Type Latch | ||
Logic Function D Type | ||
Number of Channels 8 | ||
Polarity Non-Inverting | ||
Mount Type Surface | ||
Package Type SO | ||
Pin Count 20 | ||
Minimum Supply Voltage 4.5V | ||
Input Level TTL | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature -40°C | ||
Maximum Propagation Delay Time @ CL 45ns | ||
Maximum Operating Temperature 125°C | ||
Length 13mm | ||
Standards/Approvals No | ||
Series 74HCT | ||
Height 2.45mm | ||
Output Type 3 State | ||
Automotive Standard No | ||
The 74HC373: 74HCT373 is an octal D-type transparent latch with 3-state outputs. The device features latch enable (LE) and output enable (OE) inputs. When LE is HIGH, data at the inputs enter the latches. In this condition the latches are transparent, a latch output will change each time its corresponding D-input changes. When LE is LOW the latches store the information that was present at the inputs a set-up time preceding the HIGH-to-LOW transition of LE. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the latches. Inputs include clamp diodes. This enables the use of current limiting resistors to Interface inputs to voltages in excess of VCC.
Low switch leakage
Related links
- Nexperia 74HCT373D 8-Bit Non-Inverting, 20-Pin SO
- Nexperia Octal D Type Latch 20-Pin SO
- Toshiba 8-Bit Octal D Type Latch D Type Flip-Flop, 20-Pin SOIC
- Renesas Electronics 8-Bit Octal D Type Latch CMOS, 20-Pin SOIC
- Nexperia 74HC245D 8-Bit Non-Inverting CMOS, 20-Pin SOIC
- Nexperia 74AHCT245PW 1 Bus Transceiver 20-Pin TSSOP
- Texas Instruments Bus Transceiver 20-Pin TSSOP-20
- Nexperia 74HCT573D Transparent D Type 20-Pin SOIC