Legrand Heavy Duty Adjustable Bend Hot Dip Galvanised Steel Cable Tray, 75 mm Width, 50mm Depth

Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Heavy Duty Accessories

Bends, risers, tee pieces, and couplers
The bends and risers are adjustable between 0° and 90°
The coupler set will join two lengths of tray

Approvals

BS729

Specifications
Attribute Value
Accessory Type Heavy Duty Adjustable Bend
Material Hot Dip Galvanised Steel
Series Swifts
Depth 50mm
Width 75 mm
4 In stock for delivery within 1 working days
Price Each
kr 346,06
(exc. VAT)
kr 432,58
(inc. VAT)
Units
Per unit
1 - 9
kr 346,06
10 +
kr 311,46
Related Products
Cantilever arms enable horizontal runs of cable tray ...
Description:
Cantilever arms enable horizontal runs of cable tray to be mounted to vertical steel, concrete or masonry surfaces or to Swiftrack channel They are available in ten sizes to accommodate all tray widths Cantilever arms are of fabricated construction with ...
There are three alternative methods of fitting trapeze ...
Description:
There are three alternative methods of fitting trapeze hangers to threaded rods as shown below. All three methods are applicable to trapeze hangers for–600-900“€€mm widths but only type ‰ applies to narrower trapeze hangers. The recommended safe working load for ...
The suspension bracket hooks under the tray edge ...
Description:
The suspension bracket hooks under the tray edge and will accept a threaded rod - see stock no. 530-321.
Pre-galvanised medium duty couplers. Couplers are required for ...
Description:
Pre-galvanised medium duty couplers. Couplers are required for joining together MRF straight lengths or cut lengths of tray without the need for further drillingMRFC standard couplers are supplied in pairsMRFC standard coupler is supplied singly.