Fluke I30S Current Clamp, 20 A DC Max, AC/DC Adapter, 20 A AC Max, Voltage Output, RSCAL

RS Stock No.:: 653-9857
Mfr. Part No.:: I30S
Brand:: Fluke

Fluke I30S Current Clamp, 20 A DC Max, AC/DC Adapter, 20 A AC Max, Voltage Output, RSCAL

Subtotal (1 unit)*

Kr. 10 088,54

(exc. VAT)

Kr. 12 610,68

(inc. VAT)

FREE delivery for online orders over 750,00 kr

In Stock

6 unit(s) ready to ship

Need more? Click ‘Check delivery dates’ to find extra stock and lead times.

Units	Per unit
1 +	Kr. 10 088,54

*price indicative

RS Stock No.:: 653-9857
Mfr. Part No.:: I30S
Brand:: Fluke

Specifications

Technical Reference

Legislation and Compliance

Product Details

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	Fluke
	Product Type	Current Clamp
	Adapter Type	AC/DC
	Maximum DC Current	20A
	Maximum AC Current	20A
	Accuracy	±1% + 2 mA
	Maximum Conductor Size	19mm
	Cable Length	2m
	Output Type	Voltage
	Connector Type	BNC
	Battery Type	Alkaline
	Battery Life	30h
	Minimum Operating Temperature	0°C
	Maximum Operating Temperature	50°C
	Model Number	I30S
	Standards/Approvals	IEC 61326-1
	Safety Category Level	CAT III
	Safety Category Voltage	300V
	Calibrated	RSCAL

	Select all
	Brand Fluke
	Product Type Current Clamp
	Adapter Type AC/DC
	Maximum DC Current 20A
	Maximum AC Current 20A
	Accuracy ±1% + 2 mA
	Maximum Conductor Size 19mm
	Cable Length 2m
	Output Type Voltage
	Connector Type BNC
	Battery Type Alkaline
	Battery Life 30h
	Minimum Operating Temperature 0°C
	Maximum Operating Temperature 50°C
	Model Number I30S
	Standards/Approvals IEC 61326-1
	Safety Category Level CAT III
	Safety Category Voltage 300V
	Calibrated RSCAL

RoHS Status: Exempted

COO (Country of Origin):: CN

Fluke Current Clamp, 30A Maximum DC Current, 20A Maximum AC Current - I30S

This current clamp measures both AC and DC currents using Hall-effect sensing for non-intrusive recordings with oscilloscopes and similar instruments, and is designed for field and bench use where isolation from the conductor is required.

Features and Benefits:

• 30mA-30A DC range delivers wide measurement capability for varied loads
• 30mA-20A AC rms range supports common mains and control circuits
• Output sensitivity 100mV/A provides direct voltage output to instruments
• Accuracy ±1% of reading ±2mA ensures precise measurement at 25°C
• Frequency response DC-100kHz enables high-frequency waveform capture
• 2m cable and safety BNC connector allow secure oscilloscope connections

Applications

• Suitable for waveform capture with oscilloscopes and recorders
• Used for troubleshooting DC motor and drive current anomalies
• Ideal for verifying control circuit currents up to 30A
• Can be used for high-frequency signal monitoring in power electronics
• Used with test instruments requiring voltage-output current probes

What power source does it require and how long does it last?

It uses a 9V alkaline IEC6LR61 battery and provides approximately 30 hours of operation with a low-battery indicator.

What conductor size will it accept?

The clamp opens to accommodate conductors up to 19mm diameter.

Which safety and electromagnetic standards apply to its use?

It meets IEC 61326-1 for EMC and is rated to CAT III 300V for working voltage limits.

How is output zero adjusted for baseline correction?

A manual thumbwheel on the body allows the user to zero the output prior to measurement.

What loading conditions should the measuring instrument present?

The output expects a load impedance greater than 100kΩ and less than or equal to 100pF.

Warning

Use of the probe on uninsulated conductors is limited to 300 V ac rms or dc and frequencies below 1 kHz.

Supplied with

Alkaline PP3 battery, 4mm shrouded plug adaptor and operator’s manual.