Fluke I310S Current Clamp, 450A DC Max, AC/DC Adapter, 300A ac AC Max - RS Calibrated

The i310s Current Clamp has been designed for use with oscilloscopes and digital multimeters for accurate nonintrusive measurement of AC, DC and complex waveform currents.

Using Hall Effect technology, the clamp can accurately measure currents up to 450 A peak over the frequency range of dc to 20 kHz
These features make it a powerful tool for use in inverters, switch mode power supplies, industrial controllers, automotive diagnostics, and other applications requiring current measurements and/or waveform analysis
Output cable and connections: Safety BNC connector supplied with safety 4 mm adapter
Power Supply: 9 V Alkaline, NEDA 1604/PP3 IEC 6LR61
Safety Standards: EN 61010-1: 2001, EN 61010-2-032: 2002, EN 61010-031: 2002
300 V rms Category III, Pollution Degree 2

Keep close tabs on current flow in your electrical appliances with this current probe from FLUKE. It uses Hall Effect technology to measure AC and DC charges, making it a good all-rounder to have in your toolkit. Taking readings is simple – open the ring at the end of the instrument, slip your cable inside and close the ring.
The probe makes its assessments on conductors while they're in operation, so you don't need to disconnect your equipment. As it withstands up to 600A of inrush AC current, this is a safe option for use in volatile settings. It tips the scales at just 250g meaning it's easy to carry around when you're taking readings in the field.

• Cable length of 2m gives you plenty of room to manoeuvre
• Uses a 9V battery that provides 30 hours of operating life for convenience
• Integrated thumbwheel allows simple manual adjustment of measurement range
• LED status indicator enables easy monitoring

• Power distribution facilities
• Automotive industry
• Robotics systems

The unit has measurement ranges of 30 to 300A AC and ±45 to 450A DC, making it a versatile choice for medium-duty to heavy-duty applications.