TRACOPOWER TEM 2 DC-DC Converter, ±12V dc/ ±80mA Output, 4.5 → 5.5 V dc Input, 2W, Through Hole, +70°C Max Temp

The Traco Power TEM 2 series is a range of regulated, 2 Watt, DC/DC converters in a DIP-24 package.
These isolated converters offer tight line/load regulation and 100Vdc I/O isolation. The internal filter fitted as standard in these DC-DC converters reduces reflected input ripple and guarantees low output noise. The TEM 2 series provides an economical solution for many industrial or consumer electronics applications.

Products not recommended for new designs, please refer to the alternative at the bottom of the page
DIL-24 plastic package
Tightly regulated output
Very low output noise
Short circuit protection
Operating temperature range –25°C to +70°C
I/O isolation 1’000 VDC
Internal filter
Industry standard pinout

cUL/UL 60950-1, IEC/EN 60950-1

cUL/UL , IEC/EN, CSA File No. 226037

Increasing your output power can be a piece of cake, thanks to this DC-DC converter from Traco Power. It's just what you need to step up an input voltage of 4.5 to 5.5V DC to a reliable and regulated 12V DC output. This makes it an ideal powerhouse to support commercial and industrial equipment. Isolation between its input and output blocks the path of electrical faults, which stops short circuits from damaging equipment. An internal filter gives you the benefit of minimal output noise, so there's little chance of the device upsetting sensitive circuits.

• Wide operating temperature range of -25°C to +70°C for compatibility with demanding locations
• Mean time between failures when operating at +25°C of over 8 million hours, offering an extended service life
• Flame-retardant casing won't catch alight in the event of a fire

• Power utilities
• Industrial automation
• Electronics manufacturing
• Food and beverage industries

The unit is unlikely to give you an electric shock as it meets UL 60950-1 safety standards. Its casing is made from non-conductive plastic.