- RS Stock No.:
- 134-6473
- Mfr. Part No.:
- 410-308
- Brand:
- Digilent
5 In stock for same day dispatch
Added
Price Each
Kr. 501,17
(exc. VAT)
Kr. 626,46
(inc. VAT)
Units | Per unit |
1 + | Kr. 501,17 |
- RS Stock No.:
- 134-6473
- Mfr. Part No.:
- 410-308
- Brand:
- Digilent
Technical Reference
Legislation and Compliance
Product Details
JTAG-SMT2 SMT Programming Module
The JTAG-SMT2 surface-mount programming module allows high-speed programming of Xilinx FPGA devices from a host PC. Users can solder the module directly onto a target board like any other component. Note: The JTAG-SMT2-NC part (RS 134-6473) does not have a USB connector fitted.
Features
Compatible with all Xilinx tools
Compatible with IEEE 1149.7-2009 Class T0 - Class T4 (includes 2-Wire JTAG)
On-board ADP123AUJZ 300mA voltage regulator
Separate Vref drives JTAG/SPI signal voltages
Vref can be any voltage between +1.8V and +5V
USB 2.0 HS port drives JTAG/SPI bus at up to 30Mbit/sec
JTAG/SPI frequency settable by user
PC connector: MicroUSB (JTAG-SMT2 only)
GPIO pin allows processor reset of Xilinx Zynq platform
SPI programming modes 0/2 up to 30Mbit/sec, modes 1/3 up to 2Mbit/sec
Fully supported by Digilent's Adept software and Adept SDK
Board dimensions: 22.75 x 21.5mm
Compatible with IEEE 1149.7-2009 Class T0 - Class T4 (includes 2-Wire JTAG)
On-board ADP123AUJZ 300mA voltage regulator
Separate Vref drives JTAG/SPI signal voltages
Vref can be any voltage between +1.8V and +5V
USB 2.0 HS port drives JTAG/SPI bus at up to 30Mbit/sec
JTAG/SPI frequency settable by user
PC connector: MicroUSB (JTAG-SMT2 only)
GPIO pin allows processor reset of Xilinx Zynq platform
SPI programming modes 0/2 up to 30Mbit/sec, modes 1/3 up to 2Mbit/sec
Fully supported by Digilent's Adept software and Adept SDK
Board dimensions: 22.75 x 21.5mm
RS Product Codes
Note
This module is not needed for Digilent Xilinx FPGA boards as they have this functionality built-in.
An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.
Specifications
Attribute | Value |
---|---|
Accessory Type | Programming Module |
For Use With | FPGA Devices |
- RS Stock No.:
- 134-6473
- Mfr. Part No.:
- 410-308
- Brand:
- Digilent