Megger 1010-516 Current Clamp, For Use With MCC1010 UKAS

  • RS Stock No. 183-9469
  • Mfr. Part No. 1010-516
  • Brand Megger
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

The current probe is designed for measurements of AC currents up to 1000 A with a 1000:1 step-down ratio. The probe offers excellent accuracy (0.3% error at full range) and small phase shift (0.7° at full range) so it can be used for metering of power, energy and power quality applications. Such high performance is achieved because the magnetic cores are made from high-permeability FeNi alloy. The rated terminating resistance (burden) of 1 Ω must be provided by the instrument connecting to MCC1010 and MVC1010. The output terminals are protected with a voltage limiting circuit ensuring a safe-to-touch voltage under all rated conditions.

CAT IV 600 V current measurement to 1000 A AC
1 mA/1 A sensitivity with rated burden of 1 Ω
Large jaws for cables up to 52 mm
Overvoltage protection of the output terminals
Suitable for leakage currents

Specifications
Attribute Value
Accessory Type Current Clamp
For Use With MCC1010
Calibrated UKAS
1 In stock for delivery within 3-5 working days
Price Each
kr 4 480,40
(exc. VAT)
kr 5 600,50
(inc. VAT)
Units
Per unit
1 +
kr 4 480,40
Not available for next day delivery
Related Products
Superior measurement range from 100mA to 3000 Aac2000 ...
Description:
Superior measurement range from 100mA to 3000 Aac2000 Hours continuous battery life (two AA MN1500 LR6 alkaline batteries, not supplied)Low battery and range overload indication. Range selection by robust rotary switch. High external field rejection. Excellent accuracy over full range. ...
Compact design power terminal blocks for mounting exclusively ...
Description:
Compact design power terminal blocks for mounting exclusively on TS 35 rails of 2.3 mm depth. The terminals are built for a simple and secure connection under difficult conditions, using only an 8 mm male hexagonal spanner. A tightening point ...
Megger Duplex probe 1 connect handspike with sprung ...
Description:
Megger Duplex probe 1 connect handspike with sprung loaded tips fitted with a connector socket for easy connection to any connector test lead. Replaceable probe tips have hardened needle points, gold plated for excellent low-resistance contact. Tips are sprung to ...
Kits for performing tests required by NF C ...
Description:
Kits for performing tests required by NF C 15-1001 DT-170 (differential controller)1 DT-300 (earth and continuity measuring device and extension cord)1 M-9955538 (diagnostic book 15-100)1 DT-500* (Insulation controller and connectors).