RS PRO ESD Earth Bonding Box with 10mm x 2 4m Socket x 1

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

RS PRO Anti-static Earth Bonding Point Box

These EBP boxes meet the need defined in EN 61340-5 for connecting the elements of an ESD Protected Area (EPA) to a common connection point or Earth Bonding Point (EBP).

The normal earth contact is linked via an individual 1 meg-ohm current limiting resistor. In the event of a workstation element inadvertent contact with the mains supply voltage, the resistor will limit the fault current to less than 0.3 mA at 240 V.

RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.

RS PRO have a great range of ESD grounding accessories including bonding plugs, bonding boxes, bonding brackets and cords plus many more to help eliminate the build up of static discharge which can be a risk to static sensitive components or devices.

Features and Benefits:

Fits in the bench top
Connects up to 3 operators to ground
Complete with 2 m earth lead with ring terminal
Easy to fit using self adhesive pads
Manufactured from black ABS
Size: 44 mm x 68 mm x 30 mm

Typical Applications

ESD grounding accessories form part of a workplace safety system to monitor and/or eliminate the build-up or discharge of static electricity that may pose a risk to electrical components such as computer hard drives.

FAQs

What is bonding?
Bonding is used to reduce the risk of electric shocks when there is a fault somewhere in the supply of electrical installation.

What are ESD grounding accessories used for?
ESD (electrostatic discharge) grounding accessories are components within ESD grounding loops. These accessories are used in workplaces where sensitive electronic equipment must be protected from static electricity, or where there's a danger of flammable liquids or gases igniting.

ESD protection is achieved by electrical grounding. Grounding accessories are components that may be required as part of an entire ESD grounding system. They're often used to connect and integrate ESD-safe mats, ESD continuous monitors, wrist straps, ESD safe shoe covers and other apparel, or ESD-safe surfaces.

Types of ESD grounding accessories
Available accessories include a range of connectors, bonding points, bonding plugs, bonding boxes, bonding brackets, earthing wires, individual replacement snap studs, stud installation tools, earth stud kits, crocodile clips and a variety of adaptors such as stud-to-banana sockets.

Standards

Supports ESD S20.20 and EN 61340-5-1 ESD control programme compliance

Note

The small hole to the centre of the box has an integral screw and cannot be used to fix the bonding unit to a surface. Self-adhesive pads are not supplied with this product.

Specifications
Attribute Value
Accessory Type Earth Bonding Box
Connector Type 10mm x 2 4m Socket x 1
Termination Type Ring Terminal
Complies with EN 61340-5-1 Yes
59 In stock for delivery within 1 working days
Price Each
kr 371,88
(exc. VAT)
kr 464,85
(inc. VAT)
Units
Per unit
1 - 9
kr 371,88
10 - 19
kr 357,00
20 +
kr 345,84
Related Products
Ideal for the storage of Surface Mount Devices, ...
Description:
Ideal for the storage of Surface Mount Devices, these boxes are available in two sizes of single layer, with 60 or 130 clear plastic phials. The boxes are manufactured from high impact polystyrene, with a foam insert in the base ...
Conductive transit boxes, 200 kraft single wall B ...
Description:
Conductive transit boxes, 200 kraft single wall B flute design. Lined with antistatic foam offering excellent mechanical protection. Ideal for shipping ESD sensitive PCB's assemblies and components. Complete with blank address label.
Conductive IC storage boxes, designed to store IC's ...
Description:
Conductive IC storage boxes, designed to store IC's and other small components. Ideal for use in the field in stores and for transit. Fitted with 6mm high dense foam in the base.
The Raaco black, professional service case is used ...
Description:
The Raaco black, professional service case is used for safe transportation of electronic components. The case dimensions are 260mm width x 338mm length x 57mm height. This case is made of conductive carbonised polypropylene with anti-static protection. It allows flexibility ...