Bi Pin Indicator Light, 14 V, 80 mA, 1000h

  • RS Stock No. 889-6966
  • Mfr. Part No. 7646-10PK
  • Brand VCC
Technical Reference
Legislation and Compliance
Non Compliant
COO (Country of Origin): TW
Product Details

T-1 (4mm) Bi-Pin

A range of T-1 1/4 (4mm) Bi-pin filament indicators, specifically intended for illumination in confined spaces, e.g. meters, switches, etc.

Body colour coding: White (6V), Yellow (12V), Green (24V), 14V and 28V colour coding not applicable

Wire-Ended & Bi-Pin

Filament lamps will perform to specification and give optimum life when:,a) They are powered at the rated voltage from a stabilised 50Hz ac supply,b) Ambient temperature is in the range 20 to 25°C,c) No mechanical vibration is present.,Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA). Operation from a dc supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care therefore should be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.

Specifications
Attribute Value
Voltage Rating 14 V
Lamp Base Bi Pin
Current Rating 80 mA
Diameter 4.3mm
Lamp Size T-1 1/4
Length 15.2 mm
Luminosity 0.5 mscp
Life Hours 1000h
Discontinued product
Related Products
VEML6040 color sensor senses red, green, blue, and ...
Description:
VEML6040 color sensor senses red, green, blue, and white light and incorporates photodiodes, amplifiers, and analog / digital circuits into a single chip using CMOS process. With the color sensor applied, the brightness, and color temperature of backlight can be ...
The Brennenstuhl LED Nightlight has a built-in dusk ...
Description:
The Brennenstuhl LED Nightlight has a built-in dusk sensor and a socket. The light can be personalised with three colours (Green, Blue and White), chosen by a rotary switch. The British Type G three-pin socket and plug is childproof and ...
Snap-in fixing, requires no additional hardware7mm coloured diffused ...
Description:
Snap-in fixing, requires no additional hardware7mm coloured diffused low profile super-flat polycarbonate fresnel lens. Tri-colour contains a red and a green LED, when both are on yellow is produced. Solder lug connections. Tri-colour types have pins for connections (longest pin ...
From Signal Construct, this SMLD Series LED sits ...
Description:
From Signal Construct, this SMLD Series LED sits in a 13mm bezel of bright satin chrome plated brass housing, and features a 10mm glass optical lens that aids in magnifying light output. This LED Panel Indicator is sealed to IP67, ...