- RS Stock No.:
- 816-5265
- Mfr. Part No.:
- DEMSR-08GD06SWBQB
- Brand:
- InnoDisk
Discontinued product
- RS Stock No.:
- 816-5265
- Mfr. Part No.:
- DEMSR-08GD06SWBQB
- Brand:
- InnoDisk
Technical Reference
Legislation and Compliance
- COO (Country of Origin):
- TW
Product Details
Innodisk 3SE Industrial SLC mSATA SSD (SATA III)
Innodisk mSATA 3SE is designed as the standard Mini PCIe form factor with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. The form factor refers to the MO-300 specification which established by JEDEC. Regarding of mechanical interference, Innodisk mSATA 3SE absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.
Innodisk mSATA 3SE effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
Innodisk mSATA 3SE effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
SLC High Endurance NAND (60K Program / Erase Cycles)
High Speed up-to Read: 460 / Write: 230MB/sec (Sequential)
Compliant with SATA I and SATA II SATA III interface
Enhanced power cycling management
Intelligent error recovery system
iSMART disk health monitoring
Fixed BOM
Operating Temperature range : -40゚C to +85゚C
High Speed up-to Read: 460 / Write: 230MB/sec (Sequential)
Compliant with SATA I and SATA II SATA III interface
Enhanced power cycling management
Intelligent error recovery system
iSMART disk health monitoring
Fixed BOM
Operating Temperature range : -40゚C to +85゚C
Solid State Drives
Specifications
Attribute | Value |
---|---|
Model | 3SE |
Internal/External | Internal |
Industrial | Yes |
Form Factor | mSATA |
Interface | SATA III |
Capacity | 8 GB |
Nand Type | SLC |
Length | 50.8mm |
Width | 29.8mm |
Height | 4.4mm |