Micrel, KSZ8051RNL-EVAL

  • RS Stock No. 722-7300
  • Mfr. Part No. KSZ8051RNL-EVAL
  • Brand Micrel
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TW
Product Details

Evaluation Board for KSZ8051 Series

The KSZ8051/8031/8021 series is a Low-Power, small package 10Base-T/100Base-TX Physical (PHY) Layer Transceiver that provides the MII interface or the RMII interface to transmit and receive data over standard CAT-5 unshielded twisted pair (UTP) cable or fiber
Fully-compliant to IEEE 802.3/802.3u Standard
Single 3.3V supply with internal 1.2V regulator, and optional 3.3V, 2.5V or 1.8V VDDIO
Integration of termination resistors on the chip
Energy Detect Power Down when the cable is not plugged; and power down/ slow oscillator mode when the device is not in use
25MHz crystal for input reference clock
HP Auto MDI/MDIX crossover support
LinkMD® TDR-based cable diagnostics

Ethernet Communications - Microchip

Discontinued product
Related Products
The CY4541 EZ-PD CCG4 Evaluation Kit demonstrates the ...
Description:
The CY4541 EZ-PD CCG4 Evaluation Kit demonstrates the functionality of USB Type-C Power Delivery (PD) controllers for a Two-Port USB Type-C based Host System. A CCG4 dual port USB Type-C controller can act either as a power provider (Source) or ...
The CY4500 EZ-PD Protocol Analyzer supports protocol analysis ...
Description:
The CY4500 EZ-PD Protocol Analyzer supports protocol analysis and decoding of the USB-PD (Power Delivery) and USB Type-C specifications packets on the Configuration Channel lines. The analyzer allows debugging of the USB Power Delivery communication. The CY4500 acts as a ...
The AEKD-USBTYPEC1 evaluation kit is designed to let ...
Description:
The AEKD-USBTYPEC1 evaluation kit is designed to let you test the USB Power Delivery protocol stack implemented on the ASIL-B 32-bit Power Architecture® microcontroller SPC58 C (Chorus) line (from 1 to 10 MB flash, single or multi-core, including ISO CAN ...
USB PD 3.0 compliant. Universal input mains voltage ...
Description:
USB PD 3.0 compliant. Universal input mains voltage range: from 90 VAC to 264 VAC (frequency from 45 Hz to 65 Hz)Three fixed PDOs available: 5 V, 9 V, 15 V – 3 A continuous operation. Load power limited to ...