RawlPlug Steel Masonry Anchor M8 x 98mm, 14mm Fixing Hole

RS Stock No.:: 528-211
Mfr. Part No.:: R-RBL-08HW
Brand:: RawlPlug

RawlPlug Steel Masonry Anchor M8 x 98mm, 14mm Fixing Hole

Price Each (In a Pack of 10)**

Kr. 56,247

(exc. VAT)

Kr. 70,309

(inc. VAT)

50 In stock for same day dispatch*

50 available from Europe for delivery within 2 working day(s)

* Delivery dates may change based on your chosen quantity and delivery address.

FREE delivery for orders over kr 500,00

Units	Per unit	Per Pack**
10 +	Kr. 56,247	Kr. 562,47

**price indicative

RS Stock No.:: 528-211
Mfr. Part No.:: R-RBL-08HW
Brand:: RawlPlug

RawlPlug R-RBL-H Rawlbolt™ All Purpose Shield Anchor Plug Hook Bolt.

From RawlPlug this is the R-RBL-H Rawlbolt shield anchor Hook bolt plug, one of RawlPlug’s most sought after all purpose expanding shield anchors. The R-RBL-H Rawlbolt is the Hook bolt version, designed to provide you with maximum performance. The expanding sleeve is made up of 3-pieces providing excellent expansion and optimum load safety for any material.

Features and Benefits.

R-RBL-H Rawlbolt Expanding Hook Bolt Plug.

Shield anchor.

Expanding.

Excellent durability.

3-Piece expanding sleeve.

Optimal load and safety capacity.

Used in any material.

Suitable for permanent and temporary anchoring.

Safety Note: Hook Rawlbolts and not suitable for all Arrest Systems or shock loading.

Typical Shield Anchor Hook Bolt Fixings Applications.

Supporting ladder restraints.

Supporting Guy ropes, stays and cables

Material the R-RBL-H Rawlbolt Hook Bolts are Compatible with?

Approved for use in:

Cracked concrete C20/25-C50/60.

Non-Cracked concrete C20/25-C50/60.

Unreinforced concrete.

Reinforced concrete.

Solid clay brick ≥ 20MPa.

Hollow lightweight concrete block LAC 5 ≥ 5MPa.

Hollow sand lime brick ≥ 15MPa.

Concrete hollow floor block (Teriva).

Hollow core slab C20/25.

Hollow core slab C30/37-C50/60.

R-RBL-H Rawlbolt Expansion Hook and Eye Bolts Fixings Available?

Stock number 528227, M6, Shield anchor Eye Bolt, 12 mm x 83 mm.

Stock number 528205, M6, Shield anchor Hook Bolt, 12 mm x 83 mm.

Stock number 528233, M8, Shield anchor Eye Bolt, 14 mm x 98 mm.

Stock number 528211, M8, Shield anchor Hook Bolt, 14 mm x 98 mm.

Stock number 6816738, M10, Shield anchor Eye Bolt, 16 mm x 120 mm.

Stock number 6816735, M10, Shield anchor Hook Bolt, 16 mm x 120 mm.

Stock number 6816731, M12, Shield anchor Eye Bolt, 20 mm x 145 mm.

Stock number 6816744, M12, Shield anchor Hook Bolt, 20 mm x 145 mm.

How to use the R-RBL-H Rawlbolt Expansion Hook / Eye Bolts?

Drill a hole (have pre-drilled hole ready) ensure that it is the correct diameter and depth needed.

Special note: If fixing into brickwork avoid all mortar joint areas.

Clean out the drilled hole removing all debris and dust (important to thoroughly remove everything, use a blowpump).

Insert the anchor into the pre-drilled hole till it is flush with the surface then position the Hook as required.

Tighten the fixing carefully, only to the recommended torque using the Hex but and not the Hook.

Attribute	Value
Thread Size	M8
Type	Shield Anchor Hook Bolt
Length	98mm
Fixing Hole Diameter	14mm
Material	Steel
Hook Inside Diameter	10mm