Hirschmann SPIDER 8TX, Unmanaged 8 Port Ethernet Switch

The Hirschmann 8TX is an unmanaged entry-level industrial Ethernet Rail-Switch. The switch store and forward switching mode, Ethernet and Fast-Ethernet (10/100 Mbit/s). A space-saving design and is recommended for small networks. The Spider 8TX includes plug and play capabilities, LED indicators to show the current status and management software. It is made to stay resilient against shock and vibration, as well as electromagnetic interference. It has a very efficient power consumption, making the Spider 8TX a cost-effective addition to a network. It has 9.6VDC to 32VDC operating voltage.

Port type and Quantity:8 x 10/100BASE-TX, TP cable, RJ45 sockets, auto-crossing, auto-negotiation, auto-polarity
Power supply/signaling contact:1 plug-in terminal block, 3-pin, no signal contact
Current consumption at 24VDC Maximum 160mA
(8) 10/100BASE-T(X) ports allow for single devices or complete network segments
Multi address capability - learns up to 1,000 addresses
Learnt addresses - monitors the age of the learned addresses. Addresses over 300 seconds old are deleted from the address table
The SPIDER 8TX resets when input voltages falls below a threshold After a reset in will re-initialization

Printing machines
Industrial use

cUL 508 (E175531)
IP30 rated
IEC 60068-2-27 shock
IEC 60068-2-6 vibration
EN 61000-4-2 electrostatic discharge (ESD)
EN 61000-4-3 electromagnetic field
EN 61000-4-4 fast transients (burst)
EN 61000-4-5 surge voltage
EN 61000-4-6 conducted immunity
FCC CFR47 Part 15
EN 55022