NCS20062DR2G onsemi, Op Amp, RRIO, 3MHz, 1.8 → 5.5 V, 8-Pin SOIC
- RS Stock No.:
- 163-0180
- Mfr. Part No.:
- NCS20062DR2G
- Brand:
- onsemi
Available to back order for despatch 05.08.2024
Added
Price Each (On a Reel of 2500)
Kr. 2,771
(exc. VAT)
Kr. 3,464
(inc. VAT)
| Units | Per unit | Per Reel* |
| 2500 + | Kr. 2,771 | Kr. 6 927,50 |
| *price indicative | ||
- RS Stock No.:
- 163-0180
- Mfr. Part No.:
- NCS20062DR2G
- Brand:
- onsemi
Legislation and Compliance
- COO (Country of Origin):
- PH
Product Details
NCS20062, 5V, 3MHz, Rail-to-Rail I/O, Dual Operational Amplifier, ON Semiconductor
The ON Semiconductor NCS20062 operational amplifiers provide rail-to-rail input and output operation and 3 MHz bandwidth.
These CMOS devices with high input impedance and low bias currents are ideal for interfacing with signal sensors.
These CMOS devices with high input impedance and low bias currents are ideal for interfacing with signal sensors.
- Rail-to-Rail Input and Output
- Wide Supply Range: 1.8 V to 5.5 V
- Wide Bandwidth: 3 MHz
- High Slew Rate: 1.2 V/s at VS = 1.8 V
- Low Supply Current: 125 A per Channel at VS = 1.8 V
- Low Input Bias Current: 1 pA Typical
- Wide operating temperature range from -40°C to 125°C
- Wide Supply Range: 1.8 V to 5.5 V
- Wide Bandwidth: 3 MHz
- High Slew Rate: 1.2 V/s at VS = 1.8 V
- Low Supply Current: 125 A per Channel at VS = 1.8 V
- Low Input Bias Current: 1 pA Typical
- Wide operating temperature range from -40°C to 125°C
Operational Amplifiers, ON Semiconductor
Specifications
Attribute | Value |
|---|---|
| Amplifier Type | General Purpose |
| Mounting Type | Surface Mount |
| Package Type | SOIC |
| Power Supply Type | Single |
| Number of Channels per Chip | 2 |
| Pin Count | 8 |
| Typical Single Supply Voltage | 1.8 → 5.5 V |
| Typical Gain Bandwidth Product | 3MHz |
| Typical Slew Rate | 1.2V/µs |
| Minimum Operating Temperature | -40 °C |
| Maximum Operating Temperature | +125 °C |
| Maximum Input Voltage | 5.5 V |
| Offset Voltage | 4mV |
| Output Current | ±100 mA |
| Rail to Rail | Rail to Rail Input/Output |
| Typical Voltage Gain | 120 dB |
| Height | 1.5mm |
| Input Voltage Range | 1.8 → 5.5 V |
| Dimensions | 5 x 4 x 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Typical Input Voltage Noise Density | 20nV/√Hz |
| Minimum Input Voltage | 1.8 V |
| Input Offset Current | 1100pA |