Keysight Technologies N2791A Oscilloscope Probe, Probe Type: Differential 25MHz 700V

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): MY
Product Details

Keysight Technologies Oscilloscope Probe

The Keysight Technologies N2791A oscilloscope probe offers conventional earth-grounded Keysight oscilloscopes to be used for floating signal measurements of up to 700V of differential voltage and common-mode voltage. It offers sufficient dynamic range and bandwidth for your application to make the floating measurements found in power electronics circuits safely and accurately. It also has an over-range indicator which alerts the user when the probe input exceeds the dynamic range of the probe. It is compatible with InfiniiVision 5000, 6000 (except 100MHz) and 7000 Series (with version 5.26.0001 software), Infiniium 8000, 54830 Series (with version 5.7 software) and Infiniium 9000 Series (with version 2.0 software). Each of these scopes can support four N2790A probes.
Supplied with alligator clips (2), hook clips (2), USB power cord 2m, 4 AA batteries, manual.

Features and Benefits

Bandwidth is DC to 25MHz (–3dB)
Attenuation ratio is 10:1/100:1
Input impedance is 4Mohm ll10pF each side to ground
Differential range is (10:1) ±70V (DC + peak AC)
Maximum differential is (100:1) ±700V (DC + peak AC)
Common mode range is ±700V (100:1) (DC + peak AC) or 70V (10:1)
Absolute maximum voltage is 1000VRMS CAT III (1/100 & 1/1000)
Offset (typical) is ±7.5mV
Source input impedance is 1Mohm BNC interface
AC CMRR (typical) is -80dB at 50/60Hz and -40dB at 1MHz
Compatible with any oscilloscope with 1 MΩ BNC input
Ambient operating temperature ranges between -10°C and 50°C
Power requirement 4xAA cells



Attribute Value
Probe Type Differential
Attenuation 1:10, 1:100
Bandwidth 25MHz
Maximum Common Mode Input Voltage 700V
Connector Type BNC
Model Number p N2791A
Safety Category Level CAT II
Safety Category Voltage 1000V ac
Series N
Safety Category CAT II 1000 V ac
Rise Time 14ns
8 In stock for delivery within 1 working days
Price Each
kr 6 510,41
(exc. VAT)
kr 8 138,01
(inc. VAT)
Per unit
1 +
kr 6 510,41
Related Products
Bandwidth DC-70 MHz. Rise time ≤5 nsDC accuracy ...
Bandwidth DC-70 MHz. Rise time ≤5 nsDC accuracy ±2%Attenuation ratio 50 X/500 XMaximum differential test voltage (DC + Peak AC) 50 X: 150 V, 500 X: 1500 VMaximum input common mode voltage (voltage-to-earth Vrms) 600 V CATIII, 1000 V CATIIInput ...
New generation of low-cost single-ended active probes with ...
New generation of low-cost single-ended active probes with Auto. Probe interface, compatible with Keysight's Infinii. Vision and Infiniium families of oscilloscopes. These probes have the general-purpose, high-speed probing characteristics suitable for wide-ranging applications including digital system design, ...
The Tektronix TCP300 Series of split-core current probes ...
The Tektronix TCP300 Series of split-core current probes incorporates transformer and Hall effect technology. The TCP300 models TCP303 (796-2683 ), TCP305A ( 781-0810 ) and TCP312A ( 781-0801 ) are used with amplifier TCPA300 ( 764-4391 ), available separately, to ...
The Teledyne Le. Croy High Voltage Differential Probe ...
The Teledyne Le. Croy High Voltage Differential Probe AP031 is a low cost, battery-operated active differential probe intended for measuring higher voltages. The differential techniques employed permit measurements to be taken at 2 points in a circuit without reference to ...