Microchip , 1-Channel Ethernet Transceiver 24-Pin QFN, KSZ8081RNDCA-TR
- RS Stock No.:
- 177-3053
- Mfr. Part No.:
- KSZ8081RNDCA-TR
- Brand:
- Microchip
1430 In stock for same day dispatch
Added
Price Each (In a Pack of 10)
Kr. 10,573
(exc. VAT)
Kr. 13,216
(inc. VAT)
| Units | Per unit | Per Pack* |
| 10 + | Kr. 10,573 | Kr. 105,73 |
| *price indicative | ||
- RS Stock No.:
- 177-3053
- Mfr. Part No.:
- KSZ8081RNDCA-TR
- Brand:
- Microchip
Technical Reference
Legislation and Compliance
Product Details
The KSZ8081 is a single-supply 10Base-T/100Base-TX Ethernet physical-layer transceiver for transmission and reception of data over standard CAT-5 unshielded twisted pair (UTP) cable. The KSZ8081 is a highly-integrated PHY solution.
Ethernet transceiver
MII interface support (KSZ8081MNX)
RMII v1.2 Interface support with a 50MHz reference clock output to MAC, and an option to input a 50MHz reference clock (KSZ8081RNB)
RMII back-to-back mode support for a 100Mbps copper repeater
MDC/MDIO management interface for PHY register configuration
Programmable interrupt output
LED outputs for link and activity status indication
On-chip termination resistors for the differential pairs
Baseline wander correction
HP Auto MDI/MDI-X to reliably detect and correct straight-through and crossover cable connections with disable and enable option
Auto-negotiation to automatically select the highest linkup speed (10/100Mbps) and duplex (half/full)
MII interface support (KSZ8081MNX)
RMII v1.2 Interface support with a 50MHz reference clock output to MAC, and an option to input a 50MHz reference clock (KSZ8081RNB)
RMII back-to-back mode support for a 100Mbps copper repeater
MDC/MDIO management interface for PHY register configuration
Programmable interrupt output
LED outputs for link and activity status indication
On-chip termination resistors for the differential pairs
Baseline wander correction
HP Auto MDI/MDI-X to reliably detect and correct straight-through and crossover cable connections with disable and enable option
Auto-negotiation to automatically select the highest linkup speed (10/100Mbps) and duplex (half/full)
Specifications
Attribute | Value |
|---|---|
| Standard Supported | IEEE 802.3 |
| Number of Channels per Chip | 1 |
| Typical Data Rate | 100Mbit/s |
| Integrated CDR | Yes |
| Mounting Type | Surface Mount |
| Package Type | QFN |
| Pin Count | 24 |
| Dimensions | 4 x 4 x 0.83mm |
| Maximum Operating Temperature | +70 °C |
| Minimum Operating Temperature | 0 °C |