SMC 5/2 Pneumatic Control Valve Solenoid/Pilot SY5000 Series

  • RS Stock No. 234-5894
  • Mfr. Part No. SY5140-5LOU
  • Brand SMC
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): JP
Product Details

SY5000 Z Series Valves

Higher flow capacity than body ported SY type Cv=0.3 (3000 series) Cv=0.7 (5000 series)
Compact, lightweight design, ideal for installation in restricted spaces or enclosures
Low power consumption allows direct PLC control
Service life in excess of 50 million cycles
5//2 and 5//3 valve configurations
L type pinch plug or DIN plug connections
Non locking manual override

Note

When ordering valves with a pinch type plug connection plug connectors must be ordered separately. Valves with a DIN connection are supplied with DIN 43650 plugs.

//media.rs-online.com/t_line/LI234589-02.gif

SMC SY Z Series

A range of modular DIN rail mounted solenoid operated valves and accessories for pneumatic circuits. All valves operate using compressed filtered air (lubricated or non-lubricated) and have an operating temperature range of -10 to +50°C.

Specifications
Attribute Value
Manufacturer Series SY5000
Mounting Style Manifold
Function 5/2
Actuation Type Solenoid/Pilot
Solenoid Fitted Yes
Body Material Die Cast Aluminium
Maximum Flow Rate 687NL/min
Solenoid Voltage 24V dc
Solenoid Power Consumption 0.4W
Minimum Operating Pressure 0.15MPa
Minimum Operating Temperature -10°C
Maximum Operating Temperature +50°C
Maximum Operating Pressure 0.7 MPa
Thread Standard Rc
Number of Ports 5/2
Discontinued product
Related Products
The VQC series has five standard wiring packages ...
Description:
The VQC series has five standard wiring packages bringing a world of ease to wiring and maintenance work, while the protective enclosures of three of them conform to IP67 standards for protection from dust and moisture. The use of multi-pin ...
These valves can be used singly or with ...
Description:
These valves can be used singly or with a manifold system. Low power consumption enables direct operation by PLC. They have a Non locking manual override. Range of 5//2 and 5//3 valves with electrical control for assembly on G1/8" manifold.Connector ...
Power consumption: 24Vdc -1.6W, 220Vac 50/60Hz – 2.2/1.9W200 ...
Description:
Power consumption: 24Vdc -1.6W, 220Vac 50/60Hz – 2.2/1.9W200 l/min flow rateDIN Plug connectors sold separately.
Pneumatic start-up valves gradually increase pressure on system ...
Description:
Pneumatic start-up valves gradually increase pressure on system start-up and exhaust air rapidly when the system is shut down. Air supply and exhaust can be manually operated, and can be locked in the exhaust position. Combined soft start and dump ...